No, asymmetric connections do not require the same bandwidth for each direction. In asymmetric connections, the bandwidth is usually allocated unequally between the upstream (upload) and downstream (download) directions. This is common in DSL, cable, and satellite internet connections.
A faster device bandwidth can improve response time by enabling quicker data transfer rates between the device and the network. Smaller message sizes can also reduce response time as they require less data to be transmitted. Conversely, slower device bandwidth and larger message sizes can increase response time due to longer transfer times.
Drivers are required to signal at least 100 feet before changing directions. This gives other drivers and pedestrians enough time to anticipate the upcoming maneuver and react accordingly. Signaling well in advance helps improve overall road safety.
No, you cannot change the rotation direction of an engine easily. The direction of rotation is determined by the design and placement of engine components such as the crankshaft and camshaft. It would require significant modifications to the engine's internal components to change its rotation direction.
Doppler effect in sound is asymmetric. This means the change in frequency depends on whether the source is in motion or observer is in motion even though relative velocities are same in both cases. Doppler effect in sound is asymmetric because sound is mechanical wave requiring material medium and v, v0, vs are taken with respect to the medium. .Doppler effect in light is symmetric because light waves are electromagnetic (do not require medium)
Scalar quantities are physical quantities that can be fully described by a single value or magnitude, such as mass or temperature, without direction. Vector quantities, on the other hand, require both magnitude and direction for complete description, such as displacement or velocity. Scalars can be added algebraically, while vectors require vector addition taking into account both magnitude and direction.
it is delay sensitive becoz it doesnt require constant stream for data transfer which is related to bandwidth.
You can't ! Each computer would require an equal share of the available bandwidth from the router !
Good luck
The roll-off factor of a digital filter defines how much more bandwidth the filter occupies than that of an ideal "brick-wall" filter, whose bandwidth is the theoretical minimum Nyquist bandwidth. The Nyquist bandwidth is simply the symbol rate expressed in Hz: Nyquist Bandwidth (Hz) = Symbol Rate (Sym/s) However, a real-world filter will require more bandwidth, and the excess over the Nyquist bandwidth is expressed by the roll-off factor. Suppose a filter has a Nyquist bandwidth of 100 MHz but actually occupies 120 MHz; in this case its roll-off factor is 0.2, i.e. the excess bandwidth is 0.2 times the Nyquist bandwidth and the total filter pass-bandwidth is 1.2 times the Nyquist bandwidth.
“laptop has capability of recieving wireless internet, so what do I need. the connections in area all require a code.”
"High bandwidth is not needed for simple blogs as there are not that many things running on the blog sites. They do not require a high amount of bandwidth, or data. It only requires people to type something out and submit it to the website for publishing. Speed or amount of data is not really a factor for simple blogs."
The main advantage of bandwidth is that it determines the amount of data that can be transmitted over a network in a given time, allowing for faster and more efficient communication. However, a disadvantage is that higher bandwidth can lead to increased costs and may require more advanced infrastructure, which can be a barrier for some users or organizations. Additionally, if not managed properly, high bandwidth can lead to network congestion and reduced performance.
The minimum bandwidth required for a multiplexed channel depends on the number of channels being multiplexed and the bandwidth of each individual channel. In general, the total minimum bandwidth needed is the sum of the bandwidths of all the channels being combined. For example, if you are multiplexing four channels, each requiring 1 MHz, a minimum bandwidth of 4 MHz would be necessary. Additionally, some multiplexing techniques may require guard bands to prevent interference, which would increase the total bandwidth requirement.
they require a special tool to disconnect them.
H channels
One could require Colocation services if they are a small business but want the IT requirements of a larger business. One can have their server on someone else's bandwidth and access it remotely.
speed or velocity = distance/time Speed does not require direction, i.e. it is a scalar quantity. Velocity does require direction, i.e. it is a vector quantity.