0
What else can I help you with?
How long does it take to heat 450 liters water with 20killowatt element?
To calculate the time it takes to heat 450 liters of water with a 20-kilowatt element, you need to consider the heat capacity of water (4.18 J/g°C), the starting temperature of the water, and the desired ending temperature. With this information, you can calculate the total energy needed to heat the water and then divide it by the power of the element (20,000 watts) to find the time.
How long will it take to heat the water to 26 degrees?
The time it takes to heat water to a specific temperature depends on factors such as the initial temperature, the heat source, and the amount of water being heated. To get an estimate of the time needed, you could use a formula that takes into account these variables, such as the specific heat capacity of water and the power of your heating element.
How does a tankless water heater work?
A heating element inside of the water pipes heat the water as it passes through. Each time the faucet is turned on, the element is turned on. When the water goes off, so does the element. Thus, water is heated only when needed rather than being held in a storage tank.
How long does it take for a hot water tank to heat up?
The time it takes for a hot water tank to heat up can vary depending on the size of the tank and the power of the heating element. On average, it can take anywhere from 30 minutes to 2 hours for a hot water tank to heat up completely.
How long does it take for a hot water tank to heat up and reach its desired temperature?
The time it takes for a hot water tank to heat up and reach its desired temperature can vary depending on the size of the tank and the power of the heating element. On average, it can take anywhere from 1 to 2 hours for a hot water tank to heat up completely.
How long to heat 500 liter water with 3kw element?
Specific Heat of Water = 4.1813 kJ/l/K If starting temperature is say 10°C - 500 Litres * 4.1813 (100°C - 10°C) = 188158.5 kJ 188158.5kJ / 3kW = 62719.5 Seconds = 17.42 Hours
Why does water take so long to warm up?
The specific heat of water determines how much energy is needed to heat water.
How long do you have to wait for your plaster to set until you heat your new jacuzzi?
If there is water in it you can heat it.
What are immersion heaters used for?
Immersion heaters are used for heating water in a hot water tank. Immersion heaters are usually controlled by thermostat and they will heat your water to a set temperature for as long as you leave it on that setting, or you can have a timer set. It is usually an expensive way to heat water compared to central heating systems with hot water circuits.
My Car heater doesn't blow heat immediately when car is started?
You can not get heat from cold water, The engine has to run long enough to get the water in the engine HOT. That is were you get heat from HOT WATER-- Coolent
How long does a water heater typically take to heat up?
A water heater typically takes about 1 to 2 hours to heat up a full tank of water.
How long does it take for a hot water heater to heat up the water?
A hot water heater typically takes about 1 to 2 hours to heat up the water to the desired temperature.
