That would depend on local codes... I fiqure 2 fixture units and even if the code allow the use of 11/2" diameter pipe I always use 2" MIN.
well kitchen sinks are set at 2 fixture units and on a 2" drain you can have 4 because horizontal 2" line can have 8 fixtures units and 2" vertical can have 16 fixture units.
What is the condendsate in GPM flow and what tonnage is the unit
It will Carry 10
That would depend on the fixture units each fixture has and the developed length of the vent piping
One can purchase cheap kitchen units from many companies. They are available at low prices from 'Wickes', 'Homebase', 'Cut Price Kitchens' and 'Units Online'.
240g of granulated sugar = 20.04 tablespoons in US and British Kitchen Units and 19.75 tablespoons in Metric (European) Kitchen Units.
Because the drainage system is over loaded by to many fixture units
10,784 drains can be connected to a main vent give or take depending on the fixture units and the developed lenght 10,784 drains can be connected to a main vent give or take depending on the fixture units and the developed lenght
First, you didn't say how many fixture/units,(i.e. toliet, kitchen sink, shower, lavatory, hose bib, etc.) you'll need. The size of line (pipe) depends on this. Example: According to Uniform Plumbing Code 2000 edition, 300 feet from meter to house, minimum 12 fixture/units needs a 1" service line. Hope this helps.
The number of fixture units that a 4-inch horizontal pipe can accommodate varies based on plumbing codes and the type of fixtures connected. Generally, a 4-inch pipe can handle around 40 to 50 fixture units, depending on factors like the length of the pipe and the specific code provisions in your area. To get an accurate assessment, it's best to consult local plumbing codes or a plumbing engineer.
That would depend on how many drainage fixture units you want to drain and which LOCAL code your using.
There is no answer as the units are incompatible and therefore not convertible. In plumbing, a Fixture Unit is equal to one cubic foot of water drained in an 1 1/4 pipe over one minute. A Fixture Unit is not a volume or a flow rate unit but a design factor.