No its not.. this is a cheap way of doing it... You'll need to watch the galvanized pipe as it'll begin to rust and eventually leak due to the heat... The best is to use copper...
There are no hoses that do this. There is only copper pipe, galvanized pipe, or PVC normally use in a home water supply.
I would use hot water conn. on it. Both on cold and hot
installed means to put in. I installed a heater in my car. I put in a heater in my car.
If galvanized piping was uset to plum the house, it may have rusted shut, an easy fix would be to run a new line in copper or PEX from the water heater to the valve
Yes, an electric baseboard heater can be installed under a towel rack in a bathroom.
There is not a manifold on a water heater, they are installed after or with the heater. A manifold is a branch that allows several water lines to be hooked up to one supply. The new pex lines use a manifold, instead of the old way with copper where you just branch off the copper. Off of the hot line is a manifold that has 2--# , this way you can run, say, ten different lines off of the manifold to all the fixtures you have.
No. Not directly. It needs to be 18 inches away... in length, not distance according to the UPC. An 18 inch water heater flex would work or 18 inches of copper tube with a pex adapter on the end will work.
form_title= Tankless Water Heater form_header= Repair or install a tankless water heater in your home! Do you need a tankless water heater repaired or installed?*= () Repaired () Installed What size water heater do you need?*= _ [50] What is your budget on the water heater?*= _ [50]
Not recommended as galvanized piping plugs with rust really quick and eats through the walls of the pipe.
It can maintain the cooling temperature of water and 80% of copper is available.
"How much" as a question is quite vague. Some hot water heaters are comprised of copper only. So this now depends on the size of the hot water heater. Some hot water heaters have no copper whatsoever.
next to the oil filter if it has one installed. remove cover plate and install heater not an easy job. tip get it installed by a autoshop