0
Is the base of an ADA toilet the same size as the standard toilet or I guess the real question is would I have to change the hole in the floor for the ADA toilet?
Assuming you have a standard toilet now, it will bolt on the same way in the same position. ADA are just taller floor to seat. Most toilets are 12 inches from the back wall to the center of the drain. Older ones, before 1940 or so were 14 inches and I have come across a few odd ones that are 9 inches.
What else can I help you with?
What is the standard height of a toilet?
The standard height of a toilet is typically around 15 inches from the floor to the top of the seat.
What is the standard height of a handicap toilet?
The standard height of a handicap toilet is typically between 17 to 19 inches from the floor to the top of the seat.
What are toilet seat height standards in the US?
The height of a standard toilet seat is 14" from a furnished floor.
What is the standard height of an ADA-compliant toilet?
The standard height of an ADA-compliant toilet is between 17 to 19 inches from the floor to the top of the seat.
What is the standard height requirement for an ADA-compliant toilet?
The standard height requirement for an ADA-compliant toilet is between 17 and 19 inches from the floor to the top of the seat.
What is the standard height requirement for an ADA-compliant toilet seat?
The standard height requirement for an ADA-compliant toilet seat is between 17 and 19 inches from the floor to the top of the seat.
How can I change a toilet?
To change a toilet, first turn off the water supply and flush the toilet to empty the tank. Disconnect the water supply line and unscrew the bolts holding the toilet to the floor. Lift the toilet off the floor and remove any remaining wax seal. Place a new wax seal on the flange and lower the new toilet onto it. Secure the toilet to the floor with new bolts and reconnect the water supply line. Finally, turn the water supply back on and test the toilet for leaks.
Can you change a basement toilet line into a floor drain?
Yes... is the short answer. The toilet has a trap in itself. You would have to be able to break out the floor and put a P trap in the existing line
What size wax ring should I use for my toilet installation?
For a standard toilet installation, it is recommended to use a wax ring that is a standard size of 3 or 4 inches in diameter. This will help create a proper seal between the toilet and the floor drain.
What is the standard height of toilet tank flush lever from the floor?
They are usually about 24-26 inches high
What are the most obvious places that an American standard toilet leaks?
The ONLY places any toilet can leak is between tank and bowl, or between bowl and floor.
Standard size of toilet?
Standard height is 15" but you can get comfort height or ADA models which are 17" high. The standard toilet rough in dimension is 12", which means the outlet of the toilet at the floor is 12" from the unfinished wall, but they do make 10" and 14" rough in models. The width really depends on the type of toilet you get but remember International Plumbing Code requires 15" from the center of the toilet to the nearest wall. Hope that helps.
