0
What else can I help you with?
How do you replace the valve in a Moen shower single handle faucet The faucet was installed in 2004. When you turn the handle to the left for hot the water stops. Hot water is present in the sink?
Turn the water off to the faucet. Remove the handle. The top of the faucet should unscrew to get to the ball valve. Replace the valve and gaskets then reassemble the faucet.
Which direction should I turn the faucet handle to get hot water: left or right?
Turn the faucet handle to the left to get hot water.
Why doesn't the shower the furthest from the hot water heater never get more than warm and the shower closest to it gets nice and hot?
Your hot water line needs more insulation probably. It sounds like your hot water is cooling before reaching that faucet. It may be that the one faucet is not able to turn all the way to hot until you adjust the faucet (usually in the handle) of a 10 year old or newer faucet.
How can you stop your faucet from whistling as the water gets hot?
I have this problem with my shower head, what I do to fix it is turn on the sink in my bathroom to hot, this usually shuts it up
Where can you get a non-low flow shower faucet?
There is usually a flow restrictor in the faucet that can be removed. It should be in the center of the faucet where the hot and cold mix. As far as I know the government made it mandatory for manufacturer's to only produce low flow faucet's . Manufacture only, consumers can do what they want with them.
Why does only hot water come out of the bath shower with the cold turned on?
First make sure that the hot and cold supply lines (the plumbing) aren't backwards (hot should be on the left as you are facing the faucet) or that someone accidentally ran two hot lines. For the problem to be in the faucet itself you would have to have a single handle faucet. If this is the case the control valve is broken and should be replaced. Three handle Left= Hot Water Flow. Right= Cold Water Flow Center= Controls whether the water comes out the shower head or tub faucet. Two handle Left= Hot Water Flow Right= Cold Water Flow (Diverter Valve is elsewhere if it's a tub/shower) Single handle One handle controls both water pressure and temperature
You can be hot you can be cold you can be mild you can be bold you can be tall or you can be short What am i?
You are a variety of temperature settings on a shower or faucet.
Why cant I turn my bathtub faucet all the way to hot?
I think to answer that, I would have to look at your bathtub faucet. Sorry.
Why does Hot water pour from faucet when shower head is on so water is coming from shower head but still comes out of bottom spout. how to fix?
Employ a plumber.
Can hot water bleed into the cold water line through a sing handle shower body?
Yes, it can also cross through a two handled faucet. Both the hot and cold sides of the faucet must be on and the flow of water must be stopped or greatly reduced on the outlet side of the faucet. This can occur when a hose with a spray nozzle is attached to a laundry tub faucet with the faucet on and the spray nozzle off, or when a shower faucet is on but the shower spray head is off. When another cold water outlet in the system is turned on then the pressure on the cold side of the laundry tub or shower faucet in question could be lowered below the pressure on the hot side and hot water can flow into the cold water side. There are faucets which have integral check valves which prevent this from occurring. WWW.WOODBRIDGEPLUMBING.COM
Why do you have to turn on two faucets for one to get hot water?
If you have an instantaneous hot water heater, and your faucet doesn't flow enough water it won't turn on the water heater. Thus requiring another faucet to be turned on.
How do you maintain pressure after installing a second shower head in your shower?
The piping has to be the exact same length for each shower head from the tee where the cold and hot water feeds from the top of the diverter faucet.
