"Pilot" is only when initially igniting your water heater. Some manufacturers state to leave it on "Pilot" for so many minutes before turning to on but this is only temporary. It should be then turned to "On" and then if you have a low, medium or high setting or degrees adjustment, adjust the temperature setting. Remember that most local Plumbing codes and water heater manufacturers recommend a temperature of no more than 120 degrees F.
The pilot light on a hot water heater serves as a small flame that ignites the gas to heat water. It is essential for the proper functioning of gas-powered water heaters, ensuring that the burner activates when hot water is needed. If the pilot goes out, it can prevent the heater from operating, resulting in no hot water. Regular maintenance and checks are necessary to keep the pilot light functioning efficiently.
To turn on a hot water heater, locate the pilot light or ignition switch on the unit. Follow the manufacturer's instructions to safely ignite the pilot light or turn on the heater using the ignition switch. Allow the water heater to heat up before using hot water.
If the pilot light on your hot water heater is out, you should follow the manufacturer's instructions to relight it. This typically involves turning off the gas supply, waiting for any gas to dissipate, and then using a long lighter to relight the pilot. If you are unsure or uncomfortable doing this, it is best to contact a professional plumber or the manufacturer for assistance.
Have you turned the control from Pilot to On? Have you increased the temperature setting?
The first sign of a problem is cold water,you should first check your pilot light.
is the lines on the thermal coupler and pilot light for a hot water heater supposed to get hot
The hot water heater pilot light may not stay lit due to issues with the thermocouple, gas supply, or ventilation. It is important to troubleshoot and address these issues promptly to ensure the proper functioning of the water heater.
There are several reasons why a hot water heater pilot light may not stay lit. It could be due to a faulty thermocouple, a clogged pilot orifice, a gas supply issue, or a problem with the gas control valve. It is recommended to have a professional technician inspect and repair the hot water heater to ensure safe and proper functioning.
The pilot light on your hot water heater may keep going out due to a variety of reasons, such as a dirty or damaged pilot light assembly, a faulty thermocouple, insufficient gas supply, or a draft in the area where the water heater is located. It is important to have a professional inspect and repair the issue to ensure safe and efficient operation of your water heater.
You could have a dangerous vent back flow problem. Please call your utility company about an inspection (mine doesn't charge for this). How old is the water heater?
The pilot light on your hot water heater may not stay lit due to a faulty thermocouple, a clogged pilot orifice, insufficient gas flow, or a draft affecting the flame. It is important to have a professional inspect and repair the issue to ensure safe and efficient operation of your water heater.
THERMOCOUPLE or defective gas valve