it is 4 7 11 5 9 and 0
Yes.
Yes.
the equivalent for c45 is en-8 and en-19 is c55 Need the Chemical composition and mechanical properties of C45 and EN-8 also to C55 and EN-19
I need to know the hardness for c - 45 steel.
No, the chemical composition of C45 and EN8D steels are different. C45 is a European standard designation for a medium carbon steel, while EN8D is an Indian standard grade for a medium carbon steel. It is important to check the specific chemical composition of each grade to ensure suitability for the intended application.
Designation by Standards Brand Name Ravne No. Mat. No. DIN EN AISI C45 516 1.0503 C45 - 1045 Chemical Composition (in weight %) C Si Mn Cr Mo Ni V W Others 0.46 max. 0.40 0.65 max. 0.40 max. 0.10 max. 0.40 - - (Cr+Mo+Ni)= max. 0.63
The typical hardness values for C45 steel is around 167-229 HB, for ST52 it is around 201-255 HB, and for SAE4140 it is around 217-249 HB. Hardness values can vary depending on the specific heat treatment and processing of the material.
If you call a Chrysler dealer with your VIN they are required to run it and check for recalls. Here are the possible recalls for a 1998 Cirrus RC-789-98 SUPERSEDED BY :RC-C45-04(Safety Recall C45 Floor Shifter Ignition/Park Interlock) RC-C45-04 Safety Recall C45 Floor Shifter Ignition/Park Interlock RC-843-99 SAFETY RECALL #843 -- RIGHT REAR BRAKE TUBE RC-803-99 CALIFORNIA EMISSIONS RECALL #803 -- PREPROGRAM POWERTRAIN CONTROL MODULE RC-7931-98 EMISSIONS RECALL #7931 (FEDERAL) -- CATALYTIC CONVERTER RC-7932-98 EMISSIONS RECALL #7932 (CALIFORNIA) -- CATALYTIC CONVERTER
Mild steel, typically containing around 0.05% to 0.25% carbon, is known for its ductility, weldability, and ease of machining, making it suitable for general construction and fabrication. C45, on the other hand, is a medium carbon steel with a carbon content of approximately 0.45%, offering higher strength and hardness but lower ductility compared to mild steel. This makes C45 more suitable for applications requiring strength and wear resistance, such as gears and shafts, while mild steel is preferred for structural applications.
C45 is a medium carbon steel with good machinability and hardenability, primarily used for making gears, shafts, and machinery parts. En9 is a low carbon steel with good tensile strength and toughness, commonly used in general engineering applications and automotive components. The main difference lies in their carbon content and the resulting mechanical properties.
please give me chemical composition of c45 Chemical composition in weight %: 0.42-0.50% C, <0.40% Si, 0.50-0.80% Mn, <0.045% S, <0.045% P, 0.40% Ni, <0.40% Cr, <0.10% Mo, Cr+Mo+Ni<=063. Note: Carbon steel. Austenitized at 850 oC. Source: Website Saarstahl AG, Germany, 2007.
That would be Scott number US C45. You can buy a mint copy for 55 cents and a used copy for 20 cents.