0
What else can I help you with?
What is a non heat joining method for copper tubing?
compression fitting.
How do you connect flex pipe to a copper tubing?
You use a compression fitting or something like a Sharkbite.
What is the best way to connect a 1/4 inch copper tubing to a water supply line?
The best way to connect a 1/4 inch copper tubing to a water supply line is by using a compression fitting. This fitting allows for a secure and leak-proof connection between the tubing and the water supply line.
How can I remove a compression fitting from plastic tubing?
To remove a compression fitting from plastic tubing, first make sure the water supply is turned off. Then, use an adjustable wrench to loosen the compression nut by turning it counterclockwise. Once the nut is loose, you can slide it off the tubing and remove the fitting. Be careful not to damage the tubing during this process.
What is the best way to connect PEX tubing to copper piping using a PEX to copper adapter?
The best way to connect PEX tubing to copper piping using a PEX to copper adapter is to first cut the PEX tubing to the desired length and then slide the PEX fitting onto the tubing. Next, use a crimping tool to secure the fitting onto the tubing. Finally, solder the copper adapter onto the copper piping and connect the PEX fitting to the copper adapter.
How can I connect PEX tubing to copper pipes in a plumbing system?
To connect PEX tubing to copper pipes in a plumbing system, you can use a fitting called a PEX-to-copper adapter. This adapter typically has a PEX side that can be crimped or clamped onto the PEX tubing, and a copper side that can be soldered or connected using a compression fitting to the copper pipe. Make sure to follow the manufacturer's instructions and use the appropriate tools for a secure and leak-free connection.
How to repair a pin hole inside a instant hot water heaters thin copper line?
You could drain the line, sandcloth flux and solder it. Otherwise, see if you can get a compression fitting that would fit the copper tubing
How to repair cut underground copper tubing from propane tank?
Copper tubing that is underground must be one complete piece.No connectors,no repairs.All fittings must be above ground.Also all underground copper tubing must be plastic coated to protect it from oxidation.
How can I connect PEX tubing to copper pipes?
To connect PEX tubing to copper pipes, you can use a fitting called a PEX-to-copper adapter. This adapter has a PEX side that can be crimped onto the PEX tubing and a copper side that can be soldered onto the copper pipe. This creates a secure and watertight connection between the two types of pipes.
How can I remove a PEX fitting?
To remove a PEX fitting, use a PEX tubing cutter to cut the tubing on both sides of the fitting. Then, use a PEX fitting removal tool to release the fitting from the tubing.
What is Id versus od size in copper fittings?
id means inside diameter, od means outside diameter, copper pipe and tubing is measured by the od, therefore the od the pipe or tubing will be the same as the id of the fitting
How can I attach PEX tubing to copper pipes?
To attach PEX tubing to copper pipes, you can use a fitting called a PEX-to-copper adapter. This adapter allows you to connect the PEX tubing to the copper pipe securely using crimp or clamp fittings. Make sure to follow the manufacturer's instructions and use the appropriate tools for a proper and leak-free connection.
