Possibly, the water pipe feeding from the geyser to that tap has not been secured down properly and is not rattling, or you may need to turn the pressure down on the pressure valve feeding the geyser on the cold line to reduce the noise.
Pipes rattle when water is turned off due to a phenomenon called water hammer. This happens when the sudden stop of water flow creates a pressure surge that causes the pipes to vibrate and make noise.
Singing water pipes can be caused by air that is trapped in the pipes. The air can cause a whistling or singing sound, or it can cause the pipes to knock or rattle.
Water Hammer.
Common causes of low water pressure in a kitchen sink include clogged aerators, mineral buildup in pipes, and issues with the water supply. To resolve this, you can clean or replace the aerator, flush out the pipes, or contact a plumber to check the water supply line for any issues.
Pipes can vibrate or rattle when hot water is flowing due to expansion of the pipes from the heat, causing them to rub against surrounding surfaces. This can be exacerbated if the pipes are not securely fastened in place. Additionally, air bubbles trapped in the water lines can create turbulence and vibration as water flows through the pipes.
Most likely.
Low water pressure in a kitchen sink can be caused by various factors such as clogged aerators, mineral buildup in pipes, leaks, or issues with the water supply system.
High water pressure could be the reason for pipes to rattle when you turn on the outside sprinklers. You may need to have a reducer valve installed.
Water hammering on any quick closing valves
There may be a blockage in the pipes specifically connected to the kitchen sink, preventing water from flowing through. This can be caused by debris or a clog in the pipes.
Common causes of low water pressure in the kitchen include clogged aerators, mineral buildup in pipes, and issues with the water supply line. To resolve low water pressure, you can try cleaning or replacing the aerator, flushing out the pipes, or checking for any leaks or blockages in the water supply line. If these steps do not improve the water pressure, it may be necessary to consult a professional plumber for further assistance.
Hammering pipes is the result of inertia when moving water causes the pipes to move when a valve is suddenly turned off. Use an anti-hammer device. You can purchase one at most home centers.