0
There may be air in your pipes. This is common and can be got rid of by installing 'anti-hammer' devices. - ask at your local Plumbing store.
Air causes noise in water pipes.
This is nothing to be alarmed about, I have had this problem before when doing my rounds and the most possible reason is normally when the water pressure has been turned up either at your water meter or on the councils side in the road. Sometimes when the council does pipe repairs in the road, after switching the water back on they don't turn it back to the original setting and 9 times out of ten they turn the pressure up which would cause your pressure to increase in your pipes creating the noise you hear.
What else can I help you with?
What would cause your plumbing to make a fog horn sound every couple of hours sometimes many times an hour and it is very loud and scary?
Sounds likle air trapped in the pipes.
What is a plug used for in plumbing?
Plumbing plugs are used for leaking pipes and while the pipe needs to be repaired. A plumbing plug will make the job much faster and easy.
What are the benefits of using chamfered PVC pipes in plumbing installations?
Chamfered PVC pipes in plumbing installations offer benefits such as easier installation, reduced risk of leaks, improved flow efficiency, and increased durability. The chamfered edges make it easier to connect pipes and fittings, resulting in a more secure and reliable plumbing system.
Which elements are used to make water pipes?
Copper pipes are now most commonly used in plumbing. Lead pipes were used long ago, and the word plumbing is derived from the Latin word for lead (plumbum). Iron pipes were used until relatively inexpensive copper pipes became readily available during the twentieth century.
what do you need to fix heating and plumbing?
You will need pipes and tools to fix the heating and plumbing in your home. Knowledge of how to make the repairs is a must to be sure the job is done correctly and efficiently.
What are the best practices for installing a rubber plumbing coupler in a residential plumbing system?
To install a rubber plumbing coupler in a residential plumbing system, follow these best practices: Ensure the pipes are clean and dry before installation. Apply lubricant to the coupler and pipes for easier fitting. Slide the coupler onto the pipes and tighten the clamps securely. Check for leaks after installation and make any necessary adjustments. Follow manufacturer's instructions for specific coupler types.
What is a plumbing job and how do you apply for one?
A plumbing job requires workers to clean the pipes of a home, as well as make basic repairs. You can find a job as a plumber after you complete a course and obtain a license.
How can I properly install double sink plumbing in my kitchen?
To properly install double sink plumbing in your kitchen, you will need to connect the drain pipes from both sinks to a central P-trap using PVC pipes and fittings. Make sure to measure and cut the pipes accurately, secure them tightly with appropriate connectors, and test for leaks before using the sinks. It is recommended to follow a detailed plumbing guide or consult a professional for assistance if needed.
What does a tub plumbing diagram typically include?
A tub plumbing diagram typically includes the layout of pipes, valves, and fixtures that make up the plumbing system for a bathtub. It shows how water flows in and out of the tub, as well as any connections to other plumbing components such as the drain and water supply lines.
How can I effectively connect galvanized steel pipes to PVC pipes in a plumbing system?
To effectively connect galvanized steel pipes to PVC pipes in a plumbing system, you can use a transition fitting specifically designed for this purpose. These fittings have one end that fits onto the galvanized steel pipe and the other end that fits onto the PVC pipe. Make sure to clean and prepare the ends of the pipes properly before connecting them to ensure a secure and leak-free connection.
How can I connect PEX to copper pipes in my plumbing system?
To connect PEX to copper pipes in your plumbing system, you can use a fitting called a PEX-to-copper adapter. This adapter allows you to transition between the two types of pipes by using a compression or push-to-connect fitting. Make sure to follow the manufacturer's instructions and use the appropriate tools to ensure a secure and leak-free connection.
How can I effectively solder pipes for a plumbing project?
To effectively solder pipes for a plumbing project, you will need to clean the pipes thoroughly, apply flux to the joint, heat the joint evenly with a torch, and then apply solder to the joint. Make sure the solder melts and flows into the joint to create a strong bond. Finally, allow the joint to cool and wipe away any excess solder.
