answersLogoWhite

0

green wire is gr gray wire is neutra

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What color is not common in receptacle terminal brass silver green black?

The color green is not commonly used for receptacle terminal screws. Brass and silver are typical colors for the screws, while black is often used for the insulating coating of the screw.


What color are the terminals of a standard grounding type receptacle?

green wire is gr gray wire is neutra


On a receptacle what is the silver screw?

On a receptacle, the silver screw is typically designated for the neutral wire. In standard wiring color codes, the neutral wire is usually white or light gray, and it connects to this silver screw to complete the electrical circuit safely. Properly connecting the neutral wire to the silver screw helps ensure that the electrical system functions correctly and reduces the risk of electrical shock.


What is red color on battery?

The red terminal on a car battery is the positive terminal which feeds electrical current to various devices. The black terminal is the negative, or ground, terminal which is attached to the car frame.


Which wire carries the voltage?

In an electrical circuit, the wire connected to the positive terminal of the voltage source carries the voltage. This wire is usually indicated by the color red in standard wiring practices.


How do you connect the NEMA L5-30R outlet?

A NEMA 14-30P is a plug. A 14-30R is a 3pole 4wire grounding receptacle for 125/250 volts. To wire the receptacle connect a three wire cable's red and black wires to terminals X and Y respectively. Connect the cable's white wire to the W terminal and the ground wire to the G terminal.


What color wire is negative on a car battery?

your an idiot. what color is the negative wire for everything. BLACK!!!AnswerI think it is the Red one. Red is the color code for the positive terminal (also for your battery tender). Black or green indicates the negative terminal..


What color wire goes where on the starter of a 98 Pontiac sunfire?

On a 98 Pontiac Sunfire, the red color of wire goes on the terminal marked "B" on the starter. This terminal is located close to the battery of the vehicle.


What color is the negative terminal?

To my knowledge, battery terminals themselves are not colored, OTHER THAN the color of the metal of which they are made. Occasionally, some terminals are plated with something like coppor or brass to reduce the occurance of corrosion, and then the color of the terminal would be the color of the plating matal. Generally, the battery wires, and sometimes the terminal CLAMPS, are color coded. Usually, RED is used to indicate a Positive conductor, and BLACK is used to indicate the NEGATIVE conductor.


How do you wire a switch receptical outlet with no other fixture.?

The wording of your question is a bit difficult to understand. I'm not sure what you mean by a "switch recepticle outlet." If you mean a switch/receptacle combination device, and you want the switch to operate the receptacle, first you must remove the brass bar that connects the two brass screw terminals. This can be easily done with any set of pliers small enough to get hold of the bar. By moving it back and forth a few times it will simply come off. Next connect your green or bare wire to the ground screw of the device. Then connect your neutral coming into the box to the nickle (or silver) screw terminal next to the receptacle. Then connect a black wire (or any color wire other than white, gray, green, or orange) from the switch leg terminal of the switch (most likely a black screw) to the brass terminal of the receptacle. Make this wire long enough to work with. There is no reason to make it so short you can't work with it if trouble shooting is ever necessary. And finally connect your hot wire coming into the box to the brass terminal on the switch. If all this makes absolutely no sense to you, find a competent electrician to do it for you. We do these kinds of things in our sleep. (Just kidding, of course.)


What is the difference between a theme color and a standard color?

A theme color is a color palette that represents a brand or design scheme, while a standard color is a single color without any specific associations. Theme colors are typically used consistently across a project, while standard colors can be used for variety or as accents.


Why is your palms a different color from your skin?

Your palms are a different color?!? That means you're gay... sorry. It's terminal.