0
Fall off is critical. If too shallow it will not fall away and smell - if too steep it will fall away too quickly and can be forced back up. The slope from the entry point to the toilet is ratio 1:50 - for every 50cm it moves along the wall the floor will need to be raised by 1cm. If the WC is within 2 mtrs of the window it can usually go under the floor depending on which was the joists are laying. Wcs should be no more that 6m from the soil stack.
What else can I help you with?
Do you glue the toilet flange into the toilet drain?
Usually toilet flange is glued down onto plastic drain pipe. There is a toilet flange that can be glued inside of plastic drain pipe also.
How can you fix a clogged toilet that runs in the bathtub?
It's not the toilet, there's a blockage in the pipes some where after the drain pipe from the toilet joins up with the drain pipe from the tub.You're going to need to have the pipe snaked.
What is the purpose of an overflow pipe in a toilet?
The purpose of an overflow pipe in a toilet is to prevent the toilet bowl from overflowing by providing a secondary pathway for excess water to drain out if the main drain gets blocked.
How close to the concrete do I cut a drain pipe to install a toilet?
On a standard toilet in America the drain is 12 inches from the back wall to the center of the drain.
How do you tell how much slope is on an existing drain pipe?
With a level
Does the toilet pipe lead to the same place as the kitchen sink?
In the end, yes. ANS 2 - By "the toilet pipe" -I'm going to assume you mean the drain . -The toilet drain in a small house is generally the main drain. All other drains are connected to it.
What is the purpose of a toilet drain flange and how does it contribute to the proper installation and function of a toilet?
The purpose of a toilet drain flange is to connect the toilet to the floor drain pipe. It provides a secure and stable base for the toilet to be installed on, ensuring a proper seal and preventing leaks. The flange also helps to align the toilet properly with the drain pipe, allowing for efficient and effective waste removal. Overall, the drain flange is essential for the proper installation and function of a toilet.
What is the purpose of the water pipe in a toilet system?
The purpose of the water pipe in a toilet system is to supply water to the toilet tank, which is necessary for flushing waste down the drain.
Slope of a 2 drain pipe?
1/8 " - 11/2".
What is wrong if the sink and the bathtub will drain but the toilet wont flush?
The toilet itself is plugged or the pipe from the toilet to the drain is plugged. It may be that the tub and sink have their own drain pipe that may connect to the main away from the toilet drain. Plunge the toilet or sometimes if you fill a 5 gallon bucket with water and pour it into the toilet as fast as it will take it, that will flush out the line. It is a greater amount of water all at once an forces out what the clog is.
How do you Cut toilet drain pipe installed to match new tile floor?
Inside pipe cutter
Can you install a toilet on an existing shower drain?
You need at least a 3 in. pipe -- shower is 2 in. pipe
