It really depends on the connection types you have on your laptop and projector.
If your laptop and projector have HDMI connections then use this for the image and audio.
If not, the next best would be DVI for the picture and then whatever audio connections you have (analog stereo mini jack possibly).
If you don't have any digital video connections then use the VGA for the image.
Audio and Video cables, red and white for audio and yellow for video, if both units have a S-connector use it. The S-cable is a better video cable. If you use a S-cable you don't use the yellow video cable.
The RGB cable is VIDEO only, get the AUDIO from the HEADPHONE jack on the computer.
Yes you can. Just make sure in display properties you have selected s-Video out as the secondary display and make sure projector has S-Video as the input source.
yes through s-video card projector can connect to laptop
You would need a red, yellow, white audio video cable.
Connect the av cable video plug to the composite video in (yellow). Connect the left and right audio to the stereo audio input, or connect these to your surround sound system.
If you TV has output connection, then you can get cables to connect your TV to your projector. For example I have a TV with RCA video and audio outputs, I use 3 RCA cables and then I connect them to my RCA inputs into my projector. My projector has a small speaker, so most of the time I just connect the video cable.
The DVI400 Monster Cable is a video cable. To me, it looks like the cable that connects a computer monitor to the desktop tower or connects a projector to a laptop for presentations and other stuff like that.
Only if your projector has two inputs,hook up the output video/audio of VCR into the input video/audio of the projector. Radio Shack sells switchers to do this very function.
yes, if the little block/pin on the PSP end will fit into your laptop it is absolutely safe to use it as a video/audio cable. THANKS!!
you can put a video-cable in the video port from your laptop with an adapter cable witch end in a tulip cable(yellow). the (yellow) tulip cable is conected in the S-video in port section below the S-cable input. if you can vind the adaptor witch end in a S-cable it,s better bud harder to vind. the usb connection does not work without the driver,do not know were to find one.
Yep. S video is video only