0
What else can I help you with?
What is unit weight of wmm?
The unit weight of Wet Mix Macadam (WMM) typically ranges between 2.2 to 2.4 g/cm3. It can vary depending on the mix design and materials used in the construction of the WMM layer. The unit weight is an important parameter in determining the compacted density and strength of the WMM layer.
What is the Difference between GSB and WMM?
WMM mix is produced by Well controlled Pug Mill type plant and the WMM material is Designed product and purpose of WMM is to resist water to reach upper DBM or DGBM layer.
Does WMM stand for Windows Movie Maker?
Yes. WMM stands for Windows Movie Maker.
What is the Difference between WBM and WMM roads?
WBM (Water Bound Macadam) and WMM (Wet Mix Macadam) are used for Road construction in Base course layer. WMM is a new technology. difference between WBM and WMM can be summarized as below:Stone aggregate used in WBM is larger in size compared to WMM. In case of WBM its size varies between 45 mm to 90 mm depending upon the grade while in case of WMM aggregate size varies between 4.75 mm to 20 mmIn case of WBM stone aggregate, screening material and binders are overlaid one after another respectively at the time of construction. But in case of WMM, aggregate and binding materials are premixed in a batching plant or concrete mixing machine and then brought to site for overlaying and rolling.Materials used in WBM are stone aggregate, screening material (Kankar or murrum or smaller stone aggregate for filling up the voids ) and/or binding material (stone dust or Quary dust of PI not less than 6). materials used in WMM are Stone aggregate and binders (Stone dust or Quary dust of PI not less than 6)Quantity of WBM is generally measured in Cubic Meter while quantity of WMM is measured in Square Meter.
How do you add chroma key to wmm?
Mckenzie
What is the difference between wbm and wmm?
WBM (Water Bound Macadam) and WMM (Wet Mix Macadam) are used for Road construction in Base course layer. WMM is a new technology. difference between WBM and WMM can be summarized as below:Stone aggregate used in WBM is larger in size compared to WMM. In case of WBM its size varies between 45 mm to 90 mm depending upon the grade while in case of WMM aggregate size varies between 4.75 mm to 20 mmIn case of WBM stone aggregate, screening material and binders are overlaid one after another respectively at the time of construction. But in case of WMM, aggregate and binding materials are premixed in a batching plant or concrete mixing machine and then brought to site for overlaying and rolling.Materials used in WBM are stone aggregate, screening material (Kankar or murrum or smaller stone aggregate for filling up the voids ) and/or binding material (stone dust or Quary dust of PI not less than 6). materials used in WMM are Stone aggregate and binders (Stone dust or Quary dust of PI not less than 6)Quantity of WBM is generally measured in Cubic Meter while quantity of WMM is measured in Square Meter.WMM HAS MANY ADVANTAGES OVER WBM CONSTRUCTION1. SUPERIOR GRADATION OF AGGREGATES2.FASTER RATE OF CONSTRUCTION3.HIGHER STANDARD OF DENSIFICATION4.LESS CONSUMPTION OF WATER5. STRICTER STANDARD OF QUALITY ACHIEVABLE
What the density of wmm?
The exact density of WMM (Wet Mix Macadam) can vary depending on factors such as aggregate size, moisture content, and specific composition. However, a typical range for the density of WMM is around 1.8 to 2.2 tonnes per cubic meter.
How do you use special effects on WMM?
it should be near titles animation.. i not used in while so...... lol pointless asking this question
How do I upload videos on to YouTube from WMM?
You need to Publish/Finish your WMM (Windows Movie Maker) project before you can upload them anywhere. Read this:Publishing/Finishing a WMM project** A WMM project is still in "unfinished" form (.MSWMM)and can only be viewed/edited in Windows Movie Maker.** A PUBLISHED/FINISHED WMM video is the "finalized" format.Before you can view your WMM (Windows Movie Maker) project on a media player, send it by email, or upload it anywhere, you first need to PUBLISH/FINISH the WMM project. This finalizes the project by means of "mixing down" audio/video properties.Note: The videos file name extension (or Properties) will automatically be changed to the .wmv (for computer playback) or other extension depending on the saving option.To Publish/Finish your WMM project:> With your project in the time-line view of WMM> Click on View and Tasks, to open the task pane> Under Publish to ---- (Windows Vista v2.6)> Under Finish Movie (Windows Xp v2.1)> Choose - This computer> Name the movie and select a destination to save it in(Choose/make a folder to save it in that you can access easily)> Click Next> Select option: Best quality for playback on my computer (recommended)> Click Publish or Finish (depending on your WMM version)When the video is published/finished, you should be able to find it in the folder you saved it in. Click on it and it should open up in the media player you use. The file will also be in a format that will allow you to upload it, email it or burn it to CD/DVD.
What are the functions of wet mix macadam?
wet mix mecadam is a base layer of DBM bonding b/w WMM and DBM is too good and we can compact the WMM fully..........
When you click window movie maker computer say no audio device what you have to do?
If you get the message "No Audio device detected" when trying to open WMM (Windows Movie Maker) you need to ensure you have speakers connected to your computer (and configured). WMM can't be used if you don't have an internal/external audio device connected and configured.
What is the procedure for constructing of WMM roads?
The first procedure for constructing the WMM roads is the removal of the geographical obstacles. The earth and the rock are usually also removed through digging or the use of explosives.
