0
What else can I help you with?
What length of threaded one inch gas pipe should be exposed when stubbed out from finished wall?
2" from finished wall to end of 1" threaded pipe.
How far should the drain pipe come out of the wall for a bathroom vanity?
The pipe out of the wall usually only sticks out a couple of inches. You add what is needed to the sink drain.
What is heavy wall pipe or steel?
Heavy Wall pipe refers to a steel pipe has a wall thickness of relatively thick. by SunnySteel.com
Can the basin drain pipe be offset from the pipe going into the wall?
As long as the pipe going into the wall is straight, the rest of the drain pipe can be routed however it needs to be. Very often the trap is at an angle to the pipe in the wall.
How do you remove a broken chrome bathroom sink drain pipe from the brass pipe in the wall?
There should be a nut around the chrome pipe holding it to the brass. Loosen the nut and pull the chrome pipe out.
What is schedule 20 pipe?
its the thickness of the pipe wall
What is DWC pipe?
Double Wall Corrugated Pipe.
How to properly vent a bathroom fan through the wall?
To properly vent a bathroom fan through the wall, you should first determine the best location on the wall for the vent. Then, cut a hole in the wall for the vent pipe. Connect the vent pipe to the fan and secure it in place. Finally, seal any gaps around the vent pipe to prevent air leaks.
WHAT NEEDS TO BE REPLACED WHEN Antifreeze leaking from wall pipe on Pontiac grand am?
WHAT NEEDS TO BE REPLACED WHEN ANTI FREEZE LEAKS FROM CAR WALL PIPE WHAT NEEDS TO BE REPLACED WHEN ANTI FREEZE LEAKS FROM CAR WALL PIPE WHAT NEEDS TO BE REPLACED WHEN ANTI FREEZE LEAKS FROM CAR WALL PIPE WHAT NEEDS TO BE REPLACED WHEN ANTI FREEZE LEAKS FROM CAR WALL PIPE
How can I install a shower pipe in the wall?
To install a shower pipe in the wall, you will need to first locate the studs in the wall where you want to install the pipe. Use a stud finder to find the studs and mark their locations. Then, use a drill to create a hole in the wall where you want the pipe to go. Insert the pipe into the hole and secure it in place using pipe fittings and a wrench. Finally, connect the pipe to the water supply and test for leaks before sealing up the wall.
Is the invert elevation of a pipe related to sea level?
Not quite. The invert elevation of a pipe is measured at the flow line which is the bottom inside of the pipe. The bottom of pipe elevation should be the bottom outside of the pipe. The difference betwen the two measurements is the thickness of the pipe wall.
What do you need to bring water from your house to a barn?
Should be a thick wall 3/4 poly pipe .
