T-6
A torx driver for 1998 Dakota tail light would be size 3157. It is really easy to put in. 3157 would be the bulb size/number. The Torx driver would be a number 15 or 20.
Nokia phones over the years are smaller in size and have faster speeds. They also have more technical features such as internet capabilites and music downloads.
The C4 Corvette Targa top typically requires a Torx driver size T15 for the screws. However, it's always a good idea to verify the specific model year, as there can be slight variations. Using the correct size will help avoid stripping the screws.
TORX T-15
Torx bit screwdriver size T10
what size torx for a 96 ford bronco?
Torx #45
try the customer service area on the browning web site. Browning.com
Torx #47
To remove the security Torx screw on the 2003 Acura TL headlight, you'll need a security Torx driver that matches the size of the screw, typically a T20 or T25. First, ensure the vehicle is turned off and the headlights are cool. Insert the security Torx driver into the screw and turn it counterclockwise to loosen and remove. Once removed, you can access the headlight assembly for replacement or repair.
Behind the driver side fog light grill. If you have no fog lights its under the grill at the lower front driver side of the car. To pull grill you will need to undo one 20 torx bit. Not 100% sure on the size but I do think the torx was lower than 25
what size torx bolt holds the rear parking brake housing on the 2005 chrysler pacifica