0
What else can I help you with?
What size bolt goes in the motor mount that bolts the bracket to it?
it is the same size of the bolt same as the hole and thread. the higher the grade of the bolt the more touque you can apply.
Bolt size for Honda civic rear motor mount bolt?
What size bolt for a 2005 Honda civic DX power steering tank bracket..
What size bolt is it to remove the caliper bracket on a 1999 f150?
the caliper bolt should be a 13mm and the bracket or "bridge" bolt should be an 18mm or a 21mm
What size scres to mount toshiba model 37hl67s to wall mount?
Most brackets today come with all possible bolt sizes for your range of TV sizes. It will be either a 6mm or 8mm bolt. Just try the bolts from the hardware pack when you buy your bracket.
What is the camera mount bolt size for this specific model of camera?
The camera mount bolt size for this specific model of camera is typically 1/4 inch.
What is the recommended bolt size for a TV wall mount installation?
When I mounted my TV at home, I had the same question, especially since I was working with a 65 Inch TV Wall Mount. The recommended bolt size often depends on the VESA pattern of your TV and the type of wall you’re mounting it on. For most 65-inch TVs, the standard bolts are usually M8 screws, and their length can vary depending on the thickness of your wall bracket and whether you’re mounting into drywall with studs or directly into concrete/brick. In my case, I used M8 x 45mm screws, which worked perfectly with the provided spacers and bracket. That said, I’d always suggest double-checking your TV’s manual, because manufacturers sometimes specify the exact bolt size needed for safe installation. If you’re unsure, a mounting kit for a 65 Inch TV Wall Mount usually comes with multiple screw sizes, so you’ll have options on hand.
What size bolt should I use for a TV mount?
When choosing a bolt for a TV mount, look for one that is the same size as the mounting holes on the back of your TV. Typically, a 6mm or 8mm bolt is commonly used for most TV mounts. Be sure to check the specifications of your specific TV mount to ensure you are using the correct size bolt.
What are the Motor mount bolt sizes on a 96 windstar 3.8?
The motor mount bolt size for a 1996 Windstar 3.8 is cross-thread a 3/8" bolt. That is the only bolts that will fit.
What size bolt is it for a Mazda tribute caliper bracket?
The bolt size for a Mazda Tribute caliper bracket is typically M10x1.25. It's important to verify the specific model year, as there can be variations. Always consult the vehicle's service manual or a reliable parts source for the most accurate information.
Is any full-motion wall mount strong enough to hold up a 65 TV?
Check the load rating on the mount and the weight of the TV. You need to check the bracket spacing as well, as many large TV's have wider mounting points which smaller brackets do not support. With a TV that size, I would be more worried about the wall itself. You will need to attach the bracket to the wall at the stud points only. Drywall anchors cannot be relied upon to hold a TV of this size securely.
What is the motor mount to block bolt size for a 350 Chevy?
3/8-16
What size TVs will this mount hold?
This television mount will hold TVs from 13 to 29 inches in height. The unit itself is 7.3 pounds.
