depends on what type of piping you are talking about. Are you talking about frozen pipes bursting or High temps??
Water freezes at 0 deg C. As the water freezes in the pipes, it expands and it is the force of expansion which causes the pipes to burst.
No
If your water pipes burst, turn off the main water supply, drain the faucets, and call a plumber for repairs.
Insulating water pipes helps prevent freezing by maintaining the water temperature above freezing point, reducing the risk of burst pipes and water damage. Frozen pipes can disrupt water flow and cause costly repairs if they burst due to ice expansion, so proper insulation is key for winter protection.
Water pipes should not of themselves crack at any temperature, however if pipes have water in them the water will freeze at temperatures below 0oC. If this happens then as the water freezes it will expand (ice is less dense than water) and as it expands it will either stretch metal pipes until they burst or crack ceramic pipes. For this reason external water pipes are buried at a depth to which the frost will not penetrate and internal water pipes are lagged to keep them warm.
Because when water freezes it expands thus bursting the pipes.
Rigid pipes are more likely to burst since they are more brittle and cannot travel as far when subject to strain.
becuse the brake pipes can burst
Frozen pipes burst because water expands when it freezes, creating pressure that can cause the pipe to crack or burst. To prevent this, you can insulate pipes, keep them warm with heating, and let faucets drip during cold weather to keep water flowing.
To protect them from frost damage. In cold weather, 'standing' water in cold pipes can freeze if the temperature drops low enough. When water turns to ice, it expands - which could cause the pipe to burst. However - you wouldn't know if it had burst until the ice had thawed !
If the pipes burst in your house, turn off the water supply immediately to prevent further damage. Contact a plumber to repair the pipes and clean up any water to prevent mold growth.
Head gasket