In what?this is true in TTL logic ICs because the pulldown drive transistor is strong and the pullup drive transistor is weakthis is false in CMOS logic ICs because both pulldown and pullup transistors are identicalin other devices it varies
pertaining to
whis is Endurance mors or ttl
A bipolar junction transistor with 2 or more emitters. The most common use of these was in the input section of transistor transistor logic (TTL) gates. They offered significantly higher speed and used less area on the IC chip than the diodes used in the input section of the diode transistor logic (DTL) gates that came earlier. This made TTL ICs both faster and cheaper than the DTL ICs which soon became obsolete.
The suffix in the word gymnastics is the ICS. The ICS changes the meaning of the base word by making it a study or system instead of a person.
TTL
TTL stands for Time To Live
TTL stands for "Time to Live" and refers to the amount of time a data packet is allowed to remain active in a network before it is discarded. It is used to prevent data packets from circulating endlessly in a network loop.
TTL is set to 40
TTL is faster and does not lose amplitude
The full form of TTL is Time To Live
Here are the propagation delays for these gatesa) ECL = 2nsb) TTL = 1.5-33ns depending on the type of TTL. Conventional TTL is 9ns, Advanced Schottky TTL is 1.5nsc) RTL = 25nsd) CMOS = 5-20ns depending on if it is conventional CMOS, TTL pin compatible CMOS, high speed TPC CMOS or TTL compatible CMOSSo the fastest would be the Advanced Schottky TTL (74ASxx) at 1.5ns but the choice simply said TTL which I would interpret as Conventional TTL (74xx/54xx) which would have a propagation delay at 9ns.So the winner is ... (a) ECL which has a propagation delay at 2ns.