If you're receiving no channels with a digital converter, it could be due to several reasons. First, ensure that the converter is properly connected to both the TV and the antenna. Second, check that the antenna is positioned correctly and is within range of broadcast towers. Lastly, make sure to run a channel scan on the converter to detect available signals.
You'll have to contact your cable service provider for this information.USA You will only get your local broadcast stations, like ABC, NBC, CBS, PBS, etc. Elsewhere In some countries digital television and radio is available using several alternative delivery systems:* cable * satellite * online via the Internet * terrestrial "free-to-air" broadcast systems, such as 'Freeview' and 'DAB Radio' in the UK. Some channels are free-to-view or to listen-to as radio stations. Others must be paid-for. The channels you will receive on a digital converter box depends on the system you subscribe-to, the channels they offer, and the channels you pay for.
Yes, Samsung LED TVs can receive digital channels if they are equipped with a built-in digital tuner. This allows users to access over-the-air digital broadcasts using an antenna. Additionally, if the TV is connected to a cable or satellite service, it can also display a wide range of digital channels provided by those services.
To change channels on an Artec digital to analog converter without a remote, use the buttons on the front panel of the device. Typically, there will be a channel up and channel down button that allows you to cycle through the available channels. If there is a menu button, you can access the channel list and select the desired channel using the navigation buttons. If your converter has a dial, you can also turn it to change channels.
To connect a digital TV converter box, follow these steps:1. Disconnect antenna from TV2. Connect antenna to antenna connection on Converter box.3. Connect an antenna cable from the converter box to the TV's antenna connection.4. Turn the TV to channel 3, turn on the converter box, and follow the setup menu from the converter box to search for channels.5. Keep the TV on channel 3, and change channels using the remote control for the converter box.
TV's only need a converter box if they previously are using antennas to get channels. Otherwise, TV's won't need one at all. Remember: if you are using antennas, be sure to get a converter box before June of 2009. (That is when all TV's will be going digital.) Tv's that do not have a ATSC Digital Tuner will need a converter box to watch over the air broadcast television. And the TRUTH is that some translator stations and low power stations will not change until later. FULL POWER Stations will go to digital on 06-12-2009.
One disadvantage is that the ability to record one programme whilst watching another programme at the same time is not possible when using a digital converter box.
A digital converter converts the analog signals that are received by your TV to digital signals. Most TV providers only offer digital TV these days, so you only need it if you're still using analog.
Buy a new digital ready tv, get a digital receiver Sky or Freeview for your analogue tv
To get more channels on an SDTV tuner, you can try rescanning for channels, which can be done through the TV's menu settings. Ensure you have a good-quality antenna, as this can significantly improve reception and allow access to more channels. Additionally, consider adjusting the antenna's position for optimal signal strength. If you're still not getting enough channels, you might need to upgrade to a better antenna or consider using a digital converter box.
One can convert an analog TV to HDTV by using a set top box or digital analog tuner converter box. One does require a HD ready TV though to be able to watch the HD channels.
If you have cable or sattlelite hook up at your home, you really do not need a digital converter. If you only are using rabbit ears, you really would need a digital conterter box, so you would be able to watch TV.
This depends on how you receive these channels that this happens on. If you receive them via the tuner in the TV: 1. It may be the channel from the broadcasters, or cable provider. 2. It may be the tv tuner going out/drifting. If you receive them via a Settop Box STB (cable converter): 1. If you are using HDMI it is likely that the communication between the STB and TV via HDMI is faulty, or version mismatched 1.2 to 1.3a (some TV manufacturers have a firmware/software patch that you can use to correct this). 2. If you have a STB that has Dolby digital setting, make sure it is turned off.