Possible. If you have kept them in a humidor, not in excess humidity they should be fine.
Once you have mold you pretty much need to start over. Every cigar in the humidor will be affected. (infected) You could try leaving the humidor open for a week or so and giving it a light sanding and re-humidify it with out cigars for a week or two, then test it with some expendable cigars to see if it ruins them or not. Use a digital hygrometer and the crystal jars not the sponges with water. It make it easier to regulate and keep the mold away. If the humidor is a cheapy, I would toss it and start over.
Cast aluminum refers to the process of pouring molten aluminum into a mold to create a desired shape, while aluminum die casting involves forcing molten aluminum into a mold under high pressure using a die casting machine. Cast aluminum parts are typically less complex and have lower tolerance specifications compared to aluminum die cast parts, which are known for their high precision and superior surface finish.
To make an aluminum ashtray, you can melt aluminum in a heat-resistant container and pour it into a mold of your desired ashtray shape. Once the aluminum has cooled and solidified, remove it from the mold and sand down any rough edges. You can also add any additional design details or finishes as desired.
The different types of tubes used in industrial applications include steel tubes, copper tubes, PVC tubes, and aluminum tubes. These tubes are used for various purposes such as transporting fluids, gases, and materials in industries like construction, manufacturing, and plumbing.
Cigars take on a variety of dimensions depending on the manufacturer and so there's no single standard sized box .
Mold typically cannot grow on aluminum foil itself because it is a non-porous material that does not provide the organic nutrients mold needs to thrive. However, if food or organic matter is present on the foil, mold may grow on those residues. Additionally, if the foil is stored in a damp environment, moisture could accumulate, creating conditions conducive to mold growth on any organic material present.
Casting is a fairly simple and inexpensive way to produce aluminum. Casting occurs when molten (very hot) aluminum is poured into a mold to produce a desired shape or pattern.
Maybe you can search Jiangyin Mingding Aluminum Products Co., Ltd., they have various types of aluminum alloy tubes, and they can also accept customer customization. I have worked with them, the service is very good, and the arrival time is also very fast, you can try to contact them.
To create a mold for plastic products, you will need to design the mold using computer-aided design (CAD) software or by hand. Then, you can use materials like steel or aluminum to construct the mold. The mold should be designed with the desired shape and features of the plastic product in mind. Once the mold is ready, you can inject molten plastic into the mold cavity and allow it to cool and solidify, resulting in a plastic product that matches the mold's design.
mold is the visible part of fungus. Mycelium which are the tubes that make up the bulk of the fungus will extend through the substrate that the fungus is breaking down. The spores are the reproductive part of a fungus and is what we refer to as mold. Fungi are some of the largest single organisms on the planet.
Cuba is famous for their hand-rolled cigars.
It is a gas that can be used in the aluminum foundry business for degassing (getting the bubbles out) of aluminum before it is poured in a mold.