answersLogoWhite

0

What else can I help you with?

Related Questions

Why is 4 to the second power also called 4 squared?

In classical times, the second power was described in terms of the area of a square. This led to the use of the term squareto mean raising to the second power.


How do you find the square root of 20 times the square root of 3?

Use a calculator.


How much power does a 10x10 walk in cooler use?

How to find out how much power articles use? In Canada


How much energy does a led use per hour?

LEDs come for different power ratings. Miniature LEDs use between approximately 40-90 mW. High-power LEDs - used for illumination - can use hundreds of watts per square centimeter.


Do you have to put the square or cubic sign after inches and centimeters?

You have to put the square sign when you use area and the cubic sign when you use volume. Area= Length times Width Volume= Length times Width times Height


How do you calculate DRI?

I use the square root system times Pi


How many panels are needed to generate solar power for home use?

There is no general easy answer to how many panels are needed for your exact home. This depends on how much power you use, how much rainfall you receive in your location, and other factors. A solar panel can create 70 milliwatts of power per square inch, so completely changing an average home's power usage to solar would require a solar panel that measures about 285 square feet, or about 26 square meters. This would cost around $16000. Without decreasing your lifestyle's dependency on electricity, powering your home exclusively through solar power is difficult.


What is 4 yd in square in area?

To convert square yards to square inches, you can use the conversion factor that 1 yard equals 36 inches. Therefore, 4 square yards is equal to (4 \times (36 \times 36) = 4 \times 1296 = 5184) square inches.


How much power does an electric device use if the current is 36.0 amps and the resistance is 3.9 ohms?

To find the power used by the electric device, you can use Ohm's Law and the power formula. First, calculate the voltage (V) using Ohm's Law: ( V = I \times R = 36.0 , \text{amps} \times 3.9 , \text{ohms} = 140.4 , \text{volts} ). Then, use the power formula ( P = V \times I = 140.4 , \text{volts} \times 36.0 , \text{amps} = 5054.4 , \text{watts} ). Thus, the electric device uses approximately 5054.4 watts of power.


When was the first ball dropped in Times Square?

The Times Square ball drop began in 1907, when the use of fireworks within the city of New York was banned.


How you can use multipcation to find the perimerter of a square?

It is 4 times the side length.


What is the derivative of x raised to one half?

You use the same power formula which you use for other powers of x, so the derivate is (1/2)x-1/2. This is the same as 1 / (2 times square root of x).