The pressure of liquid acting on a container or other body increases at the rate of 1 atmosphere or about 14.7 lbs. per square inch for every increase of 33 feet in depth. So doing the math results in: 5000ft./33ft. = 151.515. Multiplying that by 14.7 lbs. per square inch yields about 2227.27 lbs. per square inch at 5000 feet deep.
If this is about Deep Water Horizon, the bottom of the well below the sea floor is said to be another 18,000 feet. So, let's do the math: 5000 + 18000=23000/33ft = 696.96. Multiply this by 14.7 lbs. per square inch yields about 10,245.31 lbs psi. The psi would remain constant until it reached the sea floor and the lower 2227.27 psi. This can cause an explosion if the blow out preventer is not designed to handle these kinds of pressures. The unknown factor here, is if the gas pressure at 23000 feet below sea level might be in the range of 100,000 psi instead of the lower figures. There is no blow out preventer that can handle such pressures. No oil company can handle an accident of this magnitude. The only fix is to drill into the existing blow-out well and plug it. If there is erosion around the original casing and oil and gas opens up fissures in the earth's crust, the world may be in for a major catastrophic event. The sea could become as the blood of a dead man. And from the red color of the oil we see, this could be a very serious omen of the Apocalypses. Every nation on earth should be concerned about this accident. May God help us all.
The water pressure at 5000 feet depth is approximately 2200 pounds per square inch (psi). This pressure increases by 0.44 psi for every foot of depth.
'Hydrostatic Pressure' is the Term used for 'the force exerted by a body of fluid at rest. The pressure increases with increase in depth.There are two ways to Calculate water (clean water) pressure at any depth (both yields almost same results):1. The Hydrostatic pressure of water is 0.433 Psi/ft (Pounds per square inch Per feet). So at 5000 feet, the pressure is: 0.433 Psi/ft. * 5000 ft = 2165 Psianother way to go about it is:2. Water pressure increases at 14.7 psi every 34 feet depth. Thus Pressure at 5000 ft will be: (5000 ft / 34 ft) * 14.7 psi = 2162 Psi.
At 5000 feet deep, the water pressure would be approximately 2200 pounds per square inch (psi). This pressure increases by about 14.7 psi for every 33 feet of depth due to the weight of the overlying water column. This high pressure makes it challenging for humans to dive to such depths without specialized equipment.
At 300 feet of water depth the pressure is about 130 psi
300 feet of sea water exerts a pressure of approximately 130 psi.
The depth equivalent to 400 psi can vary depending on the fluid being measured. In general, 400 psi is equivalent to approximately 920 feet (280 meters) of seawater depth.
The pressure at a depth of 200 feet underwater is approximately 86.5 pounds per square inch (psi). This is because pressure increases by 0.433 psi for every foot of depth in water. So, at 200 feet deep, the pressure is 200 ft * 0.433 psi/ft = 86.5 psi.
The pressure at that depth is 2,167.6 pounds per square inch.I assume you mean a depth of 5000 feet in the ocean, say about the depth of leaky oil wells? If that's the case, when you see the oil coming out as fast as water out of a garden hose, it is pushing against that one ton per square inch pressure at the same time. If that leak was on the surface of the ocean instead of so far down, it probably would be squirting out at supersonic speed.
To calculate the static pressure at a depth of 25 feet with a psi of 80, we need to consider that 1 psi corresponds to approximately 2.31 feet of water. Therefore, the pressure in feet of water at 80 psi is 80 psi × 2.31 feet/psi = 184.8 feet. At a depth of 25 feet, the static pressure would be the sum of the atmospheric pressure (typically 14.7 psi at sea level) and the pressure from the water column. In this case, the static pressure at 25 feet is approximately 80 psi, assuming the measurement is taken at that depth.
The pressure at a depth of 200 feet of water is approximately 86.6 pounds per square inch (psi). This is calculated by dividing the depth (200 feet) by the specific gravity of water (0.433) to determine the pressure in psi.
The pressure at 5400 feet underwater is approximately 2333 pounds per square inch (psi). At this depth, the water column above exerts a significant amount of pressure on any object or structure submerged at that depth.
About 21.4 psi