answersLogoWhite

0

No, WD-40 is not recommended for lubing a yoyo. It is primarily a penetrating oil and can attract dirt and debris, which may affect the yoyo's performance. Instead, use specialized yoyo lubricants designed for this purpose, as they provide the appropriate viscosity and longevity without damaging the yoyo's materials.

User Avatar

AnswerBot

1w ago

What else can I help you with?

Related Questions

Is it safe and effective to use WD40 as a chain lube?

Using WD40 as a chain lube is not recommended as it is not designed for that purpose. It may not provide adequate lubrication and protection for the chain, potentially leading to increased wear and damage. It is best to use a lubricant specifically designed for bike chains to ensure safety and effectiveness.


How do you make a yomega fireball yoyo sleep for 20 seconds?

you have to unwind the string, put a lot of wd40 on the axle, and get 4 friction stickers (2 on each side)~mine sleeps longer than 20 seconds, it sleeps for about 3 and a half minute! You can also get another bearing for it, but remember to lube it alot!~yoyo nerd~


What can you do if your automatic car is stuck in gear and will not move out of first?

Find the linkage to the trans. and inspect it lube it with wd40 use a few cans it may be that it is dry


What is the best hinge lube to use wd40 pf gt85?

Neither is the best lubricant for hinges (actually WD40 is more of a penetrant, not a lubricant). If they're all you have use the GT85, but if you have Tri-Flow (best) or plumber's grease (second best) use it instead. Probably vegetable oil would be better than GT85 but it will turn rancid.


What is used to lube lug nuts?

Since lug nuts are used to hold the wheels on your car or truck you really don't want to lube or grease them at all. If the lug posts and nuts are rusted, however, you can use a rust removal compound or some WD40 to clean off the rust. To remove the oily residue from the WD40, spray the posts and nuts with brake parts cleaner - it dries quickly and leaves no film or residue behind.


Should i use wd40 on my brakes?

do not use wd40 on break parts..it leaves a residue....use a break clean product


Is it safe to use WD40 on brakes?

No, it is not safe to use WD40 on brakes as it can reduce the braking effectiveness and compromise safety.


Should you use lube?

ANAL LUBE


What can can you use to remove corrosion?

wd40.


How do you open a jammed lock on a door knob?

Spray in dry graphite and work the key until it loosens up the lock (unless you have already sprayed in a liquid lube like WD40 which will only gum it up more) If you've already made this mistake, try spraying a little brake cleaner in the keyhole to clean off the WD40, then try the graphite WD40 is not a lubricant, WD40 was invented as a WATER DISPERSANT henc WD, 40 represents the 40th attempt. WD40.


What is some recommended Oil for paintball gun?

Only use air tool or paintball specific lubricant. Never use aerosol lube like wd40. Some high end markers require certain lubes, consult the manual or box before maintaining.


How do you lubricate door locks?

So they open smoothly and quietly.ANS 2 - if the lock is in good shape, use dry graphite to lube it. (liquids, even WD40 and similar will accumulate dust and cause friction) Use liquid penetrants only on old, dirty locks to clean them.