To change the oil in an '89 Chevy Cheyenne, start by warming up the engine for a few minutes to help the oil drain more easily. Then, lift the vehicle securely and place a drain pan under the oil pan, removing the oil drain plug with a wrench to let the old oil flow out completely. Replace the oil filter using an oil filter wrench, applying a bit of new oil to the rubber gasket of the new filter before installation. Finally, replace the drain plug, refill the engine with new oil through the oil filler cap, and check the oil level with the dipstick.
autozone or napa
A small one with vacuum secondaries.
my 89 k1500 gets around 13-15
no adjustment on the 5speed manual transmission with overdrive. hydraulic clutch
The oil pan must be removed.
how do you change a power sterring belt for 89 Chevy van
5QTS. with a new filter.
Yes, but, you will have to defeat the computer, which will probably negate your local smog laws.
10w-40, until 89. Then 5w-30.
10w-40 up until 89, then 5w-30.
I'm not sure about the 89 but on my 95 it's located on the inside of the frame rail under the drivers side door.
On the drivers side of the block, right above the oil filter.