To reset the change oil light in a 2002 Yukon XL, first turn the ignition key to the "ON" position without starting the engine. Press the accelerator pedal three times within five seconds. Then turn off the ignition, and when you start the vehicle again, the oil change light should be reset. If it remains on, repeat the process to ensure it resets correctly.
Refer to owners manual
You must have the special needed tool to reset the oil indicator light.
Disconnect the positive (red) terminal from your battery for 30-60 seconds. This will reset the computer & the light should go off until the malfunctioning part malfunctions again resulting in the light coming back on.
vice & oil reset 2002 sl500
Turn the key to the on position and press the gas pedal fully to the floor 3 times within a five second period.
Turn key on, do not start. Then push the gas pedal all the way to the floor 3 times being sure to let all the way off of it each time. Then turn key off and then start the engine.
To reset the "CHANGE OIL" light, turn the ignition switch to the "RUN" position with the engine off. Fully depress and release the accelerator pedal three times in five seconds. The light will flash twice and go out.
how do i reset timing belt light on 1hz
Once you have repaired the cause of the light, it will reset itself.Once you have repaired the cause of the light, it will reset itself.
To reset the oil light in a 2002 Oldsmobile Bravada, first turn the ignition key to the "On" position without starting the engine. Then, press the accelerator pedal three times within five seconds. This should reset the oil change light. Finally, turn off the ignition and restart the vehicle to ensure the light is no longer illuminated.
You can't reset that light...there is no such thing as a 2002 Honda Element...they didn't come out until 2003.
It is very easy to reset the check engine light on a 2002 Volkswagen Cabrio. The negative battery cable can be taken off for one minute and replaced to reset the light.