To reset the maintenance light on a 1997 Acura TL, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After doing this, the maintenance light should turn off. If it doesn't, repeat the process to ensure it was done correctly.
u do a poo
i have a 97 acura 3.0 cl and just recently got an oil change and the maintenance required light switched from green to yellow, what does this mean?
(Supplemental Restraint System) SRS light is on because there is a problem with the system. Fix the problem and the light will reset itself. As long as that light is on the SRS will not function if needed.
Why is my engine light on on my 1996 acura 2.5 tl?
Reset with an OBD2 scan tool, after the repair of whatever triggered the light.
I have a'97 Acura 2.2 CL, so resetting the "Check Engine" may be different for your vehicle than for our's. On our vehicle there is a small window or slot in the instrument panel. You just slide your ignition key through this slot, and the light resets. Hope this helps.
Your ECM has deteced a problem with the emissions system. The light can be reset after the problem is repaired. You need an OBD2 scan tool to reset the light.
where is the umc fuse located on a 97 acura tl
The abs light is on because there is a problem with the system. It will remain on until the problem is fixed. Once the problem is fixed it will reset itself after it is driven.
You can take it to a professional, or you can check the reading yourself. A check engine light can mean many things.
99 percent sure there is NO oil reset procedure for the '97 sc models. If your oil light is on it is bc you are LOW on oil. Add oil immediately
Provided you are talking about the MIL Light = Malfunction Indicator Lamp? the 97 Mark VIII is an OBDII computer system. it requires a scan tool to reset / turn off the MIL / check engine light. it requires repairing the fault / problem to keep it off. drl