0
What else can I help you with?
What is the age of a light twelve SN271703?
This gun was made in 1948. It has the old style front trigger safety.
What size thread is on a browning auto 5 front sight?
3x0.5 thread
How can you tell if an old 20 dollar bill is fake?
You can tell if an old $20 bill is fake by holding it up to a light source and looking for a security thread. If the bill is real, it will have a vertical thread embedded in the left front side. If the bill is fake, the thread will be missing.
What thread is Shotgun front sight bead?
Perazzi shotgun
Browning gold front sight thread size?
The thread size is: M3.0-.5 The Browning part number for the bead is B1116580
How do you thread a Sears Kenmore model 158.14001?
Take the thread through the first thread guide which is on the right, then through the needle guide notch. Wind the thread around the tension dial and pull up to the left of the dial. Pull the thread into the thread guide at the bottom. Take the thread from front to back through the needle eye.
Is driver's side front spindle nut on Ford Festiva left handed thread?
No it is not reverse thread. The passenger side rear spindle is the reverse thread on 88-93 festivas.
What thread size was used on the baikal 628 front sight?
The Baikal 628 typically uses a front sight with a thread size of 6x0.75 mm. This is a common metric thread size used in various firearm applications. If you're looking to replace or adjust the front sight, it's advisable to verify the size with the specific model, as variations can occur.
What is the thread size for the front sight of a stoeger condor?
5/40 I believe
How do you thread a universal sewing machine model kat?
The thread must come from the FRONT of the upright spool on the back of the machine. Thread through the small eyelet on the back (nearest the spool(s), projecting from the top), then through the thread guide at the front of the machine. If you are using a double needle (therefore two spools of thread), the thread from the left-hand spool should go through the top hole and the thread from the right-hand spool through the bottom hole. Come down to the tension disks. Bring the thread through the back disk, up again under the wire guide, and down under the thread guide that is just to the left of the tension disks. Bring the thread through the eye of the take-up lever (the piece that moves up and down when you sew) from RIGHT to LEFT. Guide the thread back down through the thread guide next to the tensioner. There is a little thread guide just inside the door on the left side of the machine; bring the thread through this guide. Then pull the thread through the wire guide above the needle (it's easiest to hold the thread horizontally to do this). Thread the needle front to back. HTH. YMMV.
How do you replace rotors on the Front brakes on trailblazer?
For a how to thread visit our enthusiasts forum www.trailvoy.com
How do you thread a sun hand machine?
To thread a Sun hand sewing machine, start by placing the spool of thread on the spool pin and guiding the thread through the thread guide. Next, pull the thread down through the tension discs and then up through the take-up lever. Finally, thread the needle from front to back, ensuring the thread passes through the needle eye properly. Once threaded, pull the loose end of the thread to ensure it's secure in the machine.
