0
What size wrench do you need to change starter on1989 Chevy Cheyenne 4 wheel drive 350?
To change the starter on a 1989 Chevy Cheyenne 4-wheel drive with a 350 engine, you typically need a 13mm wrench or socket for the mounting bolts. Additionally, a 10mm wrench or socket may be required to disconnect the electrical connections. It's always a good idea to have a set of various sizes on hand, just in case.
What else can I help you with?
Do you need a torgue wrench to change starter 1994 Ford F-350?
No
What size wrenches are needed to change a starter on a 2000 Dodge pickup 1500 4x4?
The bolts on the starter take a 5/8 inch wrench. The battery cable is a 13mm wrench.
What tools do you need to change the starter on a 1992 Town car?
a wrench and some plyers.
How do you change the starter on a 1988 Nissan pickup?
disconnect neg. battery cable ,remove pos.cable from starter .10 or 12 mm wrench.remove wire from starter ,no wrench needed,its a male to female connector,remove 2 bolts holding starter to engine,12 or 14 mm wrench,thats it.
How do you remove a starter from a 2001 Infiniti G20?
with a wrench.
Removing difficult starter bolts on 1997 Ford Taurus?
If the starter bolts are difficult to remove on a 1997 Ford Taurus, they were probably put on using an air wrench. An air wrench can be used to remove them or a product called Liquid Wrench.
How do you change the starter on a 94 Mitsubishi 3000gt?
To change the starter on a 1994 Mitsubishi 3000GT, first disconnect the negative battery cable to ensure safety. Remove the starter's electrical connections and the mounting bolts, which typically require a socket wrench. Once the old starter is free, install the new starter by reversing the removal process, ensuring all connections are secure. Finally, reconnect the battery and test the new starter to ensure proper operation.
Where is the starter located on a 86 fiero?
Right in front of the oil pan (2.8l) Disconnect the battery before getting a wrench close to the starter. The starter has a HOT battery cable runnign directly to it. Shorting this to the frame with a wrench might start a fire, blow up your battery, or both.
Where is the starter for an 87 Pontiac fiero?
Right in front of the oil pan (2.8l) Disconnect the battery before getting a wrench close to the starter. The starter has a HOT battery cable runnign directly to it. Shorting this to the frame with a wrench might start a fire, blow up your battery, or both.
What tools are required to change starter on 96 Saturn?
To remove car parts, a person must have the right tools. For a person to remove a starter on a 1996 Saturn they would need a 1/2 inch socket, a 4 inch extension, a wrench, and pliers.Ê
How do you change out the starter on a 1997 Toyota Land Cruiser 4.5 liter?
To change the starter on a 1997 Toyota Land Cruiser 4.5 liter, first disconnect the negative battery terminal to ensure safety. Remove the starter's electrical connections, typically involving a couple of bolts and wiring harnesses. Then, unbolt the starter from the engine block, which usually requires a socket wrench. Finally, install the new starter by reversing the removal process, ensuring all connections are secure before reconnecting the battery.
What tools are needed to change a starter in a 1987 delta Oldsmobile?
the bolts that hold the starter on should be 9/16, so just a wrench, or socket/ratchet. the wires should be 3/8. if not, you can usually take those off with a pair of channel locks, or adjustable pliers.
