0
Usually voltage is between 110-130. Some of it depends on the Transformers load or were the voltage tap is set. which brings up or down the voltage level. A simple adjustment. Higher voltage is better then lower, but form industrial standard 5% is max. Is the circuit Loaded up or is everthing turned on.. So 130.... is alittle high but should be OK for most equipment.
What else can I help you with?
How many volts in a standard household outlet?
In the US a general purpose receptacle outlet would be 120 volts; England 240 volts, France 115 volts, Libya 127 volts, Okinawa 100 volts, Tanzania 230 volts . . .; all depends on where your house is.
How do you get 240 volts out of a 110 outlet?
You would have to run new wires to obtain 240 volts or use a step-up transformer.
Can i get 220 volt out of 120volt outlet?
No, you cannot directly get 220 volts from a 120-volt outlet. You would need a transformer or voltage converter to step up the voltage. Make sure to use the appropriate equipment to avoid damaging your devices or creating a safety hazard.
What would cause a washing machine plug to be burnt?
An outlet with too many volts in it or a short.
What would happen if you was vapped by 900000 volts stun gun?
At over 11,000 volts, the victim will usually pass away.
Is 124 volts TOO HIGH for household wall outlet in USA?
Normal voltage for 120volt outlets is 110v to 130v. It would vary depending on the length and size of the wire to the nearest power company transformer, and the different voltage terminals on the transformer that the power company connects.
Can you add a 110 outlet from one leg of the 220 wiring?
Yes but I would not advise it. Get 110 volts somewhere else.
Can you plug a 115 volt 15 amp airconditioning unit to a 100 volt outlet?
I have never seen a 100 Volt rated outlet. Usually outlets would be rated for 110 to 120 volts for residential use, or maybe 150 volts. The rating is separate from what voltage the outlet is providing. If your outlet is supplying 100 volts, as measured by an accurate voltmeter, you have some problem in your wiring or a faulty outlet. If there is only 100 volts at the outlet get an electrician to diagnose the problem if you are not completely familiar with home wiring. In general you should never use an outlet that has a voltage or current rating less that the device will consume.
Can you plug a 100 volt power tool into a 110 volt outlet?
Never heard of a power tool that runs on 100 volts AC. It would have to be 108 to 120 volts or 220 to 240 volts. It will work on the 120 volt outlet if is it 60 hertz in the U.S. or 50 Hrtz in some other countries. If it is 50 Hrtz then do not use it in the U.S. without a converter.
Can I plug a 220 volts fluorescent light into a 110 volts outlet by just changing the plug?
Yes, but doubling the voltage on any piece of equipment is a sure way of destroying that equipment.
What would happen if a plant was placed in hypotonic solution?
Nothing would happen to the plant. It will have a normal growth provided other parameters are normal.
What is the standard voltage for wall outlets?
If you are talking about normal house hold voltage it would depend in which country you live in. For North America it would be 120/240 volts. For Europe and Eastern countries it would be 240 volts. Industrial voltages vary from country to country. These normal voltages range from 120, 277, 240, 347, 415, 480, to 600 volts.
