answersLogoWhite

0

In Ontario, fire pull stations are required in various locations as per the Ontario Fire Code. They must be installed in all buildings with a fire alarm system, typically positioned near exits and at accessible locations to ensure they can be easily reached in case of an emergency. Additionally, pull stations should be located within a certain distance from any area where people may be present, ensuring prompt activation of the alarm system in the event of a fire.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Related Questions

Are manual fire alarm pull stations required?

Check with your local building department of your city or county. They will be able to tell you exactly what is required in your community.


What is the ADA height requirement of fire alarm pull stations placement in NJ?

48" from floor to the middle of the pull station


What clearance is required for a fire alarm pull station?

What are pull station clearence requirements


What is the max travel distance between two fire alarm manual pull stations?

The maximum travel distance between two fire alarm manual pull stations is typically required to be no more than 200 feet (approximately 61 meters) in most building codes and standards, such as the National Fire Protection Association (NFPA) standards. This distance ensures that occupants can easily access a pull station in case of a fire emergency. However, specific requirements may vary based on local regulations and the layout of the building. Always refer to the relevant codes and standards applicable to your location for precise guidelines.


What is ADA pull force requirements to activate a fire alarm pull station in Pa?

In Pennsylvania, the Americans with Disabilities Act (ADA) requires that fire alarm pull stations be operable with a maximum force of 5 pounds. This requirement ensures that individuals with disabilities can easily access and activate the alarm in case of an emergency. It is important for these pull stations to be installed at appropriate heights and locations to be compliant with accessibility standards.


Can you shoot a Crosman c11 with out co2?

No. C02 is required to make it fire. Without C02 all you can do is pull the trigger.


How do you put out a fire on an airplane?

There will be fire extinguishers located in the cockpit, at the stewards stations, and in the galley. Pull the pin, squeeze the trigger, and aim for the base of the flame, sweeping back and forth until ALL flames are extinguished.


How many feet should each manual fire alarm boxes be from each other?

Inside a building requiring manual pull stations, they should be located adjacent to each fire exit. For manual pull stations on street corners and buildings, they can be place anywhere the local fire department believes necessary for public safety. In Jamestown, Rhode Island, every commercial building has its own manual fire department call box on the front of the building, even if it is only ten feet from the one on the next building.


What are some pull factors about Ontario?

good beer


What type of emergency vehicle is fitted with green flashing lights?

In Ontario, green flashing lights are used by Volunteer Fire Fighters responding to a call. Please pull over to let them by.


Why does space stations have no moons?

Space stations are too small and do not have gravitational pull to draw in something that large to orbit it.


If the mechanical advantage of a machine gun is 2 it means?

It means that twice the amount of required to fire the bullet to its target than the acutal amount of energy required to pull the trigger, thus making the machine gun efficient.