Actuator speed is determined by:
Flow rate is directly proportional to actuator speed. Increasing the actuator speed will result in higher flow rates, while decreasing actuator speed will decrease flow rates. Actuator speed controls the flow of a fluid or material through a system by adjusting the rate at which the actuator allows the material to flow.
The Idle Speed Control actuator is located right behind the air intake plenum
Actuator speed is determined by:
On idle speed control actuator is located on the front of the air intake plenum
Idle Speed/Throttle Actuator - ElectronicFront RH Side Of Engine
Idle speed is not adjustable. If the speed is incorrect you have a computer, sensor, actuator, vacuum leak issue.Idle speed is not adjustable. If the speed is incorrect you have a computer, sensor, actuator, vacuum leak issue.
Idle is computer controlled and is not adjustable. If idle speed is incorrect, you have a sensor or actuator issue.Idle is computer controlled and is not adjustable. If idle speed is incorrect, you have a sensor or actuator issue.
In general the heater blower motor speed resistor is located in close proximity to the blower motor.
That fuel injection system does not have an idle valve. Everything is controlled electronically through the throttle actuator.
The 2011 Volkswagen CC has a 6-speed manual.
The 2014 Volkswagen Beetle has a 5-speed manual.