most trimmers have a metal blade that cuts the excess line. your's has probably fallen off
I have such a Snapper straight shaft weed trimmer, purchased at Wal Mart and the original head has part number M-1541, but I have found this part anywhere on the web yet. Lowe's has a universal replacment head (box says fits 98% of weed trimmers) for around $20 in June 2009. Good luck.
No. He moved to Croton when he was around 40.
Just Look Around Or If Worse comes to worse buy a trig text book
check your answer
Make an object about the size of your charachter(persionally i would give it the players sprite) and make it not visible and add a collision event with the object you want to turn around. In that put an event [reverse horizontal speed] and you are done! !!
she is a bush trimmer! she is a bush trimmer! she is a bush trimmer!
Wrapping cotton wool around a thermometer can cause the temperature reading to drop because cotton wool is a good insulator. It prevents heat from reaching the thermometer, resulting in a lower temperature reading.
by wrapping their tentacles around the casualty and stinging him or her
You remove the bottom cover off the weed trimmer, and remove the tangled old wire. Insert the new wire into the side of the trimmer and wrap it around the black spindle.
To restring a Ryobi gas trimmer, first remove the spool from the trimmer head. Cut a length of new trimmer line, usually around 10 feet, and insert one end into the hole in the spool. Wind the line evenly and tightly around the spool in the direction indicated on the spool. Leave a few inches of line unwound, then thread the line through the eyelet on the trimmer head. Reattach the spool to the trimmer head and trim any excess line.
To restring a Ryobi string trimmer, first remove the spool from the trimmer head. Cut a length of new trimmer line, thread it through the holes in the spool, and wind it evenly around the spool. Reinsert the spool into the trimmer head, and feed the line through the trimmer head eyelets. Finally, secure the spool back in place and trim any excess line.
To replace the weed trimmer string on a trimmer, follow these steps: Turn off the trimmer and disconnect it from the power source. Remove the spool housing by pressing the tabs on the sides and pulling it out. Take out any remaining old string from the spool. Cut a length of new trimmer string according to the trimmer's specifications. Insert the ends of the string into the holes on the spool. Wind the string evenly and tightly around the spool in the direction indicated on the spool. Reassemble the spool housing and reconnect it to the trimmer. Test the trimmer to ensure the string is working properly.
To reload the line on your Ryobi string trimmer, first remove the spool from the trimmer head. Cut a length of new trimmer line, usually around 10 feet, and insert one end into the spool's center hole. Wind the line evenly and tightly around the spool in the direction indicated on the spool. Leave a few inches of line unwound, then thread the line through the trimmer head's eyelet. Reassemble the spool onto the trimmer head, ensuring the line feeds through the head properly.
you protect them by wrapping tissue around them
Wrapping lean meat with fat before roasting. Example wrapping bacon around a lean meat and then roasting?
Girls usually hug their boyfriends by wrapping their arms around their Neck, and boys hug their girlfriends by wrapping their arms around the lower waist or bum
by wrapping around them and squeezing them to death