there are no set inches .... stairs are cut to a RATIO of the amount of space you need to climb [ say to the second floor of a house or to the top of a deck ] the steeper you make the stairs the higher this ratio will be. 10 inches of tread - and 8 inches of rise - is a common ballpark figure ... you cannot just decide i want my steps to be ______ height. you much use math and figure out how many steps can be divided equally into the total height. local building codes sometimes set a minimum and maximum height to the individual risers. making steps with one odd sized riser [ say shorter or higher than all the rest of the stairs so that it comes out correctly- and usually on the bottom step ] is a HUGE no-no as well. things too look up on the web are "framing square" and "stair stringer"
FTR on a floor plan typically stands for "Future Tenant Room." It designates areas intended for future occupancy or use, often indicating spaces that are not yet built out or assigned. This label helps architects and planners communicate potential uses of the space in future developments.
you cant pass the scorpian but you have to press the thing right befor you drop on the floor by the scorpian you have to make them all horizontal
Move or cause to move into a sloping position: "the floor tilted slightly"; "the balance of industrial power tilted toward the workers".Incline or cause to incline toward a particular opinion: "he is tilting toward a new economic course".
For inside mounted shutters, measure the distance between the jambs or casings on the side (width), then measure the distance from the inside edge of the top jamb/casing to the sill/floor. For outside mounted shutters, measure the same but to the outer edge of the casings.
The recommended height for a toilet flange to be installed above the floor is typically around 1/4 inch to 1/2 inch.
48" Above Finished Floor
3 - 4 feet above the floor
The standard height for a refrigerator receptacle is typically around 18 inches above the finished floor.
According to ANSI 156.19, automatic ADA swing door operater push plates are to be mounted at a minimum height of 34" on center above finished floor, and a maximum height of 48" on center above finished floor.
The standard height for a bathroom outlet is typically around 48 inches above the finished floor level.
The standard height for a refrigerator outlet is typically around 4 to 6 inches above the finished floor.
The rough in height for a vanity drain is typically around 18 inches above the finished floor level.
A towel bar in a bathroom should typically be installed at a height of 48 to 52 inches above the floor.
The ideal height for a floating mantel to be installed is typically around 54-58 inches from the floor.
The standard height for a bathroom receptacle is typically around 12-18 inches above the finished floor level.
The recommended drain height for a vanity installation is typically around 18 inches above the finished floor level.