In a series circuit with two light bulbs, if one bulb goes out, the entire circuit is interrupted. This means that electricity cannot flow through the circuit, causing both bulbs to go dark. Since the bulbs are connected in series, the failure of one component affects the entire circuit's functionality. Therefore, both light bulbs would stop working until the faulty bulb is replaced or repaired.
If one light bulb in a series circuit fails, all the other light bulbs will go out, until the failed bulb is replaced and the series circuit is completed again.If one light bulb in a parallel circuit fails, all the other light bulbs will still work.
Yes, a circuit with two light bulbs connected in series can light up. Current flows through the first light bulb, then through the second, allowing both bulbs to illuminate. If one bulb burns out, however, both bulbs will go out.
Hmm. well, it's a series circuit, so I would think they would potentially follow after the one that went out, right?? Yeah, for sure!
parallel
the same current flows through both light bulbs
In a series circuit, all bulbs are necessary to complete the circuit. If one bulb goes out, the circuit is broken, so none of the bulbs would light up.
In a parallel circuit nothing would happen. All the other light bulbs would remain on since there is an alternative path for current to flow. In a series circuit the entire circuit would be de-energized and all the bulbs would go out.
In series
In a parallel circuit, each light bulb would receive the full voltage of the power source, allowing them to burn brighter compared to a series circuit where the voltage is divided among the bulbs.
If you unscrew a light bulb in a series circuit, it will cause an open circuit, which will break the flow of current in the circuit. As a result, all other bulbs in the series circuit will also turn off because there is no longer a complete path for the electricity to flow.
Series circuit gives higher resistance compared to parallel circuit.
It depends on the circuit. If it is a constant-current circuit, any light bulbs connected in parallel with it will become brighter. If it is a constant-voltage circuit like a typical household circuit, nothing will happen. Any connected in series with it will go out.