Yes, a circuit with two light bulbs connected in series can light up. Current flows through the first light bulb, then through the second, allowing both bulbs to illuminate. If one bulb burns out, however, both bulbs will go out.
When two light bulbs are in place, there will be a circuit created where electricity can flow through both bulbs. If the circuit is intact and the bulbs are functioning, they will both light up. If one of the bulbs is faulty or the circuit is broken, then both bulbs may not light up.
Yes, one cell in a series circuit can light up two bulbs. However, the brightness of each bulb may be reduced compared to if only one bulb were connected due to the voltage being split between the bulbs.
When two light bulbs are connected in series , there is voltage drop which causes the second lamp to dimAnswerWhen two lamps are connected in series, neither lamp will be subject to its rated voltage and, so, each lamp will be dim. Surprisingly, perhaps, the lamp with the higher power will be dimmer than the lamp with the lower power!
This has to do with the potential difference(voltage) reaching each bulb.If the bulbs are placed in series, the voltage will be divided among them(for example, 9V battery powering two identical bulbs will result in each bulb getting 4.5V). Thus, they would each only be One fourth as bright than if there was a single bulb as the power is Voltage squared. If Voltage is halved then power goes one fourth.If the bulbs are placed in parallel, the current(amperage) is divided instead, resulting in each bulb getting the same voltage. This will result in both bulbs having brightness equal to a single bulb.
Adding one more battery to a parallel circuit of two light bulbs would increase the voltage across the entire circuit. This would cause both light bulbs to shine more brightly as they receive more power. It will not affect the current flowing through the circuit but will boost the overall energy provided to the circuit.
Series circuit gives higher resistance compared to parallel circuit.
When two light bulbs are in place, there will be a circuit created where electricity can flow through both bulbs. If the circuit is intact and the bulbs are functioning, they will both light up. If one of the bulbs is faulty or the circuit is broken, then both bulbs may not light up.
Yes, one cell in a series circuit can light up two bulbs. However, the brightness of each bulb may be reduced compared to if only one bulb were connected due to the voltage being split between the bulbs.
Current in a series circuit is the same throughout the circuit. Voltages are additive. Voltage in a parallel circuit is the same throughout the circuit. Currents are additive.
Series circuit.
When two light bulbs are connected in series , there is voltage drop which causes the second lamp to dimAnswerWhen two lamps are connected in series, neither lamp will be subject to its rated voltage and, so, each lamp will be dim. Surprisingly, perhaps, the lamp with the higher power will be dimmer than the lamp with the lower power!
This has to do with the potential difference(voltage) reaching each bulb.If the bulbs are placed in series, the voltage will be divided among them(for example, 9V battery powering two identical bulbs will result in each bulb getting 4.5V). Thus, they would each only be One fourth as bright than if there was a single bulb as the power is Voltage squared. If Voltage is halved then power goes one fourth.If the bulbs are placed in parallel, the current(amperage) is divided instead, resulting in each bulb getting the same voltage. This will result in both bulbs having brightness equal to a single bulb.
Adding one more battery to a parallel circuit of two light bulbs would increase the voltage across the entire circuit. This would cause both light bulbs to shine more brightly as they receive more power. It will not affect the current flowing through the circuit but will boost the overall energy provided to the circuit.
No, If they are in parallel, turning off one won't effect the other.
current in series always stays the same
A: There is no such a thing as simple circuit if the bulbs are put in series the light will dim if put in parallel both bulbs will light up the same provided the source can sustain the power increase
As a series circuit, as asked, all bulbs will go off because of that just one bulb.