It doesn't ... it works with the transmission.
It's required because the internal combustion engine works best at a fixed speed ... whereas you want the wheel speed to change frequently.
shifter rod gear linkage
To replace the gear shifter on your bike, follow these steps: Begin by removing the old gear shifter by loosening the bolt or screw that holds it in place. Slide off the old gear shifter and disconnect any cables attached to it. Install the new gear shifter by sliding it onto the handlebar and reattaching any cables. Tighten the bolt or screw to secure the new gear shifter in place. Test the new gear shifter to ensure it is functioning properly before riding your bike.
your shifter linkage is probably broken.
1) reduce throttle to idle speed 2) move gear shifter to Neutral position 3) move gear shifter to Reverse position.
The bushings on the shifter linkage need to be renewed.
Just put the gear shifter into od and go.Just put the gear shifter into od and go.
The gear shifter has a retaining clip, just below the shifter knob. Hold the retaining clip in, on both sides of the shifter rod, and the shifter knob will come off.
To perform a gear shifter replacement on your vehicle, you will need to first disconnect the battery to ensure safety. Then, remove the center console and access the gear shifter assembly. Unbolt and remove the old gear shifter, and install the new one in its place. Reassemble the center console and reconnect the battery. Test the new gear shifter to ensure it is working properly.
There is a clip in the front of the shifter handle, put the shifter in first gear and you can see it. pull it out with a regular screw driver. pull the shifter knob off, the the Gear select insert does come out. there are four bolts under that, then there are two inside the center compartment also, then the whole works will come out.
Not enough information. Will the car shift gears with the engine off? Is the gear shifter stuck in one particular gear?
Gear shifter or manual transmission.
If you notice that your gear shifter is loose, you should immediately stop driving the vehicle and have it inspected by a professional mechanic. Driving with a loose gear shifter can be dangerous and may lead to further damage to the transmission.