answersLogoWhite

0

Answeru can use construction adhesive or build the wall out w/ 2x4 on the flat .....then glue @ nail 2 the wood. better yet use small concrete nails into mortar joints thru 1" x 3/4" furring strips spaced an 16" centers. small lag screws into lead expanders work well if mortar is too hard and as stated above adhesive is cheap insurance also

wait a minute, what type of paneling? the thin luaun (however you spell it) type stuff that trailer homes are made of? If so, your backing should be a solid surface like plywood. that paneling will never take any abuse at all with 16" center furring strips. maybe put 1/2" sheetrock on your fur strips instead?

I would also install a vapor barrier--

IN A Nut Shell

1. first install the strips--

2. then glue the wall squares and add the fiberglass

3. then add Liquid Nails to the furring strips--

4. then apply the plastic sheeting / being sure to overlap the seams by about 3 inches and be sure to tape the seems. The sheeting should overlap the corners by about 4 inches on either side for accepting your adjacent walls plastic sheeting.

In my opinion: Your best bet is to build the wall out because adhesive usually does not take well to stone such as concrete, brick, or cynder-block.

I would use 1 x 3/4 furring strips. I would anchor the strips to the brick by pre-drilling holes through the brick using a concrete drill bit and a wood drill bit for the wood strips being sure that all the holes line up.

you can use tap-com screws- available at your local Home Depot or Hardware store. With these screws you don't need to use hole insert sleeves to hold the screws-- the tap-com screws will be sufficient to hold into the brick all by themselves. Set your screws about 16 inches apart and try not to drill into the seams of joining block or brick.

When you are done-- your wall will look like a wall with a bunch of wood squares.

Now is the time to decide if you want to add fiberglass insulation into the squares- before adding the plastic sheet vapor barrier.

If you want to add fiberglass you will need to lower the thickness of the fiberglasss insulation so that it does not press too hard against drywall which could make it a bit difficult to set the drywall in place.

Once your strips are up you can add a vapor barrier-- apply Liquid Nails to the furring strips with a caulking gun. / you can apply a thin layer of floor adhesive inside each square and wait 20 munutes before adding the fiberglass to each square. this way the fiberglass will hold without falling to the floor.

Now you can use 1. 1/4 inch drywall screws to mount the drywall. I personally would screw the drywall into place. I just don't trust the adhesive for long term use. feel free to use the internet DIY Videos for more information.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

Where can one find interior wall paneling?

One can find interior wall paneling to buy in a number of stores and online retailers. One can get such paneling from Lowe's, Grainger, The Home Depot and The Penelling Company.


What are the different types of interior wall types used in construction?

The different types of interior wall types used in construction include drywall, plaster, wood paneling, brick, and stone. Each material has its own characteristics and aesthetic appeal, providing different options for interior design and construction.


What are the benefits of using hardwood wall paneling in interior design?

Hardwood wall paneling in interior design offers benefits such as durability, natural beauty, warmth, and a timeless aesthetic. It can also add value to a home and provide a sense of luxury and sophistication.


What are the benefits of using wall paneling wood in interior design?

Wall paneling wood in interior design offers several benefits, including adding warmth and texture to a space, providing insulation and soundproofing, and creating a visually appealing focal point. Additionally, wood paneling is durable, easy to maintain, and can increase the value of a property.


Can you use masonite paneling in the kitchen to cook near?

Put brick masonite paneling on the wall behind the stove and sink in a rental unit, gave it a coat or two of poly finish - no problems with it


What are the benefits of using tongue and groove wood paneling for interior wall installations?

Tongue and groove wood paneling offers a seamless and sturdy fit, providing a polished look to interior walls. It also helps with insulation and soundproofing, enhancing the overall aesthetic and comfort of a space.


What are the benefits of using TG wall panelling in interior design?

Tongue and groove (TG) wall paneling offers several benefits in interior design. It provides a classic and elegant look, adds texture and depth to walls, and can help improve insulation and soundproofing. Additionally, TG paneling is durable, easy to install, and can be painted or stained to match any decor style.


How can I effectively incorporate a brick interior wall into my home design?

To effectively incorporate a brick interior wall into your home design, consider the overall style and color scheme of your space. Use the brick wall as a focal point by keeping the surrounding decor simple and complementary. Ensure proper lighting to highlight the texture and character of the bricks. Additionally, consider adding elements like artwork or shelves to enhance the visual appeal of the brick wall.


What are some creative ways to incorporate a brick wall interior into a modern home design?

One creative way to incorporate a brick wall interior into a modern home design is to contrast the rugged texture of the brick with sleek, minimalist furniture and decor. Another idea is to paint the brick wall a neutral color to blend it seamlessly with the rest of the modern design. Additionally, you can use lighting fixtures to highlight the texture and depth of the brick wall, creating a visually striking focal point in the room.


How can I incorporate a thin brick interior wall into my home design?

To incorporate a thin brick interior wall into your home design, you can start by selecting a suitable location for the wall. Consider the overall aesthetic of the room and how the brick wall will complement it. Next, choose the type and color of thin bricks that align with your design vision. Install the bricks using a suitable adhesive or mortar, ensuring they are securely attached to the wall. Finally, consider adding lighting or decorative elements to enhance the visual appeal of the brick wall in your home.


Which website offers the cheapest wall paneling?

You can find the cheapest wall paneling at some well-known online stores, such as Amazon, Home Depot, and Alibaba. The price of the wall paneling varies based on each stores.


What are some creative ways to incorporate different wall textures into interior design?

Some creative ways to incorporate different wall textures into interior design include using materials like wood paneling, textured wallpaper, exposed brick, or decorative tiles. These textures can add depth and visual interest to a room, creating a unique and dynamic space. Mixing and matching textures can also create a sense of balance and contrast in the design.