0
The combination for the glove box can't be changed until the glove box is opened. The factory code is "000". You probably have a used car with a different code set. The first step is to find the combination. This can be rather tedious as there are 1000 integers from 0 to 999 if you allow yourself to write leading zeros and you can repeat the same digit three times. In other words they are:
000
001
002
.
.
.
009
010
011
012
.
.
099
100
101
102
.
.
.
199
200
201
.
.
999
I did manage to find the code for my lock in this fashion. I had my teenage daughter do it while riding by setting a number then pushing the release lever to the right to see if it opens. IE "000 push , 001 push, 002 push", etc. We did not have to change the first two number until it was necessary in the sequence.
Next to change the code per instructions in the manual are as follows:
"Push the glove box release lever to the right to open the glove box.
# With the glove box open, hold the release to the right and slide the yellow tab up.. This locks the release open and permits you to reset the code. # After resetting the code, write it down in case you forget it. # Slide the yellow tab down and the release will return to the closed position. # Close the glove box and move the dials off the code you set to lock it.
Lost Combination If you should lose or forget your combination, there is a small key which will allow you to find the combination. The key looks like a feeler gauge which notches in one end. To find the combination you should: # Insert the notched end of the key into the right side of each dial, then rotate the dial until the key is seated. # Repeat this procedure for each dial in turn and you will have the forgotten combination. # The glove box should now open. For obvious reasons the key should not be left in the glove box. The dealer will provide you with this key when you take delivery of your new Pontiac" This is all of the info in the manual about the glove box. You may or may not have the key. If not revert back to the first steps above to find the combination. I don't believe the keys are still available. I learned that the locks have been discontinued and you would have to scrounge around to find one.
What else can I help you with?
How do you change the cabin filter on 2006 Acura TL?
located behind the glove box. Remove glove box.
How do you change the glove box lock on a 2007 Buick Lacrosse?
To change the glove box lock on a 2007 Buick Lacrosse, first, open the glove box and remove any contents. Locate the screws or clips securing the glove box door and carefully detach it. Remove the old lock by unscrewing or unclipping it from the glove box door, then replace it with the new lock. Finally, reassemble the glove box and ensure everything is securely fastened.
Where is air cabin filter Toyota sienna?
Behind the glove box. To change/clean it, you have to take the glove box off
How do you change the glove box on a Mini Cooper?
To change the glove box on a Mini Cooper, start by removing any contents and locating the screws or clips that secure the glove box to the dashboard. Carefully detach the glove box by unscrewing or unclipping it from its position. Once removed, replace it with the new glove box by reversing the process, ensuring all screws or clips are securely fastened. Finally, test the new glove box to ensure it opens and closes properly.
How do you change the cabin air filter on a Toyota Tundra?
Which Year? It's usually behind the lower glove compartment. Undue the clip on the right side of the glove box. Squeeze in the sides of the glove box and remove the box. The filter door is right behind the glove box.
How do you change the cabin filter on 2000 Honda Prelude?
You have to take the glove box right out, there is a filter housing behind it that is not visible with the glove box still in
How do you change 2004 G35 sedan cabin air filter?
It is behind the glove box, so you will need to take off the glove box and you will see it.
How do you change the glove box latch in 2009 vw jetta?
To change the glove box latch in a 2009 VW Jetta, first, empty the glove box and remove the screws securing the glove box door. Once the door is detached, locate the latch mechanism and disconnect any clips or screws holding it in place. Replace it with the new latch, reassemble the glove box door, and secure it with the screws. Finally, test the latch to ensure it operates properly.
Ho w do you change the glove box light bulb?
To change the glove box light bulb, first, open the glove box and remove any contents. Locate the light bulb socket, which is usually found at the back of the glove box. Gently twist or pull the bulb socket to release it, then remove the old bulb and replace it with a new one, ensuring it fits securely. Finally, reinsert the socket into its place and close the glove box.
How do you change a cabin air filter in a 2008 tundra?
If it is in the same place as 2007 then it is behind the lower glove box. Just open glove box disconnect the side supports so the glove box will open way down.
Where is the computer for a 1999 Chevy Venture?
Passenger side behind the glove box. Remove the glove box to get to it. Change your air conditioning air filters while you are in there.
How do you change the heater core on a 1998 silverado?
take out the glove box
