what is the part of the weed wacker that has the string on it connected to the frane
To change the weed wacker string, first, turn off the weed wacker and disconnect the spark plug. Then, remove the spool housing and take out the old string. Insert the new string following the manufacturer's instructions, and reassemble the spool housing. Finally, reconnect the spark plug and test the weed wacker.
Installing new string on a Homelite 26ss weed eater is very easy. You will need to take off the empty spool and put the new one on. Take two pieces of the strings and put each in one of the empty slots opposite each other. The put the spool and grasp the strings pulling them into place.
weed-ate, or cut with the string trimmer
To perform a Ryobi weed wacker string replacement, first turn off the weed wacker and disconnect the spark plug. Then, remove the spool housing and take out the old string. Cut a new piece of string to the correct length and thread it through the spool. Wind the string evenly onto the spool and reassemble the housing. Finally, reconnect the spark plug and test the weed wacker.
The best type of string to use for a Kobalt weed eater is a high-quality, durable trimmer line that is compatible with the specific model of the weed eater.
To replace the string on a weed eater, first, turn off the weed eater and disconnect the spark plug. Then, remove the spool housing and take out the old string. Cut a new piece of string to the appropriate length and thread it through the spool. Wind the string in the direction indicated on the spool and secure the ends. Finally, reassemble the spool housing and reconnect the spark plug before using the weed eater again.
To string a Ryobi weed wacker, first remove the spool cover and old string. Then, insert the new string through the holes in the spool and wind it in the direction indicated on the spool. Finally, replace the spool cover and trim any excess string.
To perform a Ryobi weed eater string replacement, first turn off the weed eater and disconnect the spark plug. Then, remove the spool cover and take out the old string spool. Cut a new piece of string to the appropriate length and thread it through the spool. Wind the string in the direction indicated on the spool and secure the ends. Finally, replace the spool back into the weed eater and reattach the spool cover.
0.080" per 1993 manual
The amount of weed eater string you need for yard maintenance depends on the size of your yard and how often you use the weed eater. It's a good idea to have at least one extra spool of string on hand so you don't run out in the middle of a job.
To replace the string on a Ryobi Expand-It weed wacker, follow these steps: Turn off the weed wacker and disconnect the spark plug to ensure safety. Remove the spool housing by pressing the tabs on the sides and pulling it off. Take out the old string spool and replace it with a new one, making sure to follow the directional arrows for winding the string. Feed the string through the eyelet holes on the spool housing. Reattach the spool housing and reconnect the spark plug. Test the weed wacker to ensure the string is working properly.