0
What else can I help you with?
What is the difference between the router and gateway?
The main difference between a router and a gateway is in their functionality in a network. A router will be connected to two different networks and will transmit packets between them. As for the gateway, it will link different networks using varied protocols.
What is wireless and not wireless router?
A wireless only router sends out a radio signal to all the devices, B, G and N bands. The computer/devices have to have a wirless card/dongle to work though. It only has the one ethernet port for the modem to connect to it.A Wired only router is one that only has ethernet ports connecting it to the computers/devices. There is no radio transmitter in it.Most routers have both now, usually 4 ethernet ports and the wireless radio as one, so you can connect wireless or wired devices to the router at the same time.An example world be my older tower doesn't have a wireless card and I don't want to buy a USB wireless device so I can just use the ethernet cable to connect to the router while my Laptop connects wirelessly.
G and b modes in wireless netgear router?
g & b allows older 802.11g and 802.11b wireless stations to access this device. You might want to select this mode if you have a wireless station that is using WEP security and does not support WPA-PSK or WPA2-PSK.
What type and brand of network router is strongest?
A dual band router is the best type of router for this function. It had increased power and functionality, when compared to a older single band router. It should suit your needs.
What ports is most commonly used to connect older printers to the computer?
Parallel Port-Most common uses are to connect older printers to the computer
Creating A Wireless Router Bridge?
A wireless router bridge is a way to use an old or unneeded wireless router to extend the usable range of a central Internet access point. This can be done by connecting an older router to a functioning router and then either changing the wireless mode of the router to bridge, or by changing the firmware inside of the router so it can support bridging. The end result is a wireless router that will pick up the signal from an access point and provide Internet access to any computer that uses the wireless router bridge.
How do you find your WPA2 key?
It should be in wireless properties of the router under "Security". Some older router do not support WPA-PSK, check the manual to confirm. You must be logged on as a Root or administrator.
Where can one obtain a Cisco 1841 Router?
There are a number of places where one can purchase a Cisco 1841 Router. These include the websites for eBay, Amazon and Misco. It is an older product so it's availability may be limited.
Why has your iPod Touch stop connecting to the internet?
If it says "Cannot connect", you can't go on the internet. What made you think you could? no silly. You have to be in a wi-fi area to go online. it can't connect because your not in a wi-fi area he can except it doesn't work when you put in the password
Can you connect to a printer using an Ethernet cable?
You can connect a printer using Ethernet if the printer has an ethernet jack. If not you can purchase a used HP Jet Direct box on E-Bay for $10, which has a parallel connector that works for older printers. The printer connects to the jet direct via parallel cable, then a CAT 5 (Ethernet) cable to a hub, switch or router. If you are using Windows choose Add Printer , Local Printer attached to this computer, create new port, arrow down to TCP/IP port and type in the address from your router (192.168.1.X).
What type of cable is used to connect a switch and router?
Current products will almost all connect with a standard Cat 5/5e/6 patch cable. Older (but still recent) products will either connect to a specific port on the switch (usually identified as an UPLINK) port, or require the use of a crossover cable. The issue is that ethernet sends and receives data on different pairs of wire. The newest generation of equipment is able to identify which wires to receive on, and which to transmit on, automatically. Older equipment is not as intelligent and always transmits/receives on the same wires. This requires either a specially wired port on the switch (that changes the position of the transmit and receive in the jack) or a specially wired cable (that changes the t/r wires) in the plug.
What is the best way to connect with older school friends?
Facebook is the best way.
