0
What else can I help you with?
What is the cause if your PC connect to router but there is no connection?
If you can PING the router but cannot PING to the outside world, this indicates that the router is not successfully connecting to the Internet.
Is connecting the Wii to the internet the same thing as connecting it to wifi?
Strictly NO, but in effect YES. Connecting to wifi means connecting to a wireless router - IF the router is connected to the Internet (it does not have to be), then connecting to it will also give you a an Internet connection.
Is there any wireless router through which LAN in surrounding area can be viewed without connecting any cable?
If such router is connected to that lan either thought wireless or wire, than the answer is yes. Any router can do that. If the router is connected to the lan, no router can do that.
Where is a router on PS3?
There is no router on a PS3. There should be a router connected to your computer to give you wifi. The IS a network adapter built inside the PS3 that will connect to your router. For connecting: http://www.youtube.com/watch?v=NC7aPylbI3M
Which device is best for connecting a lan to a wan?
A router.
When to use crossover and straight through?
when you are connecting same devices like computer to computer or switch to switch or router to router to use cross over cable. when you are connecting different devices like computer to switch or computer to router to use straight cable.
What cable to be used when connecting router to a switch?
straight through
A connectivity device connecting two network segments?
Router.
What connecting device do you use for two or more connecting networks?
Connecting different networks requires a router
How do you get wpa password for internet?
WPA key is sometimes on your wireless router usually on the bottom.If its not on your router you can check it by connecting to your router by Ethernet and going to the default gateway. Enter the username and password once inside the router just go and check the settings for it.
Your internet dsl works really well but your router doesnt after you reset it why?
You probably need to reenter the IP Address into the router.
Creating A Wireless Router Bridge?
A wireless router bridge is a way to use an old or unneeded wireless router to extend the usable range of a central Internet access point. This can be done by connecting an older router to a functioning router and then either changing the wireless mode of the router to bridge, or by changing the firmware inside of the router so it can support bridging. The end result is a wireless router that will pick up the signal from an access point and provide Internet access to any computer that uses the wireless router bridge.
