Want this question answered?
Be notified when an answer is posted
The end of this stick has a twist in it, above that there is a notch cut out of the stick, and then about an inch above that is another notch, you want your oil level between the notches
woomera
usually have a notch or line on the dip stick to marker those locations
Notch
Well a V-notch gives better accurate results when compared to rectangular notch.
Thru the Transmission Dip stick hole. If a manual it goes in the speedo drive in the box. Remove the drive and fill to cover the plastic drive and the notch above it. You use the drive as a dip-stick.
No notch is still alive
Ingredients: Long Stick. (preferably sturdy), Sharp point object. (Can be a rock or other item with a flat base and pointy end), String or Rope. Tools: Knife 1st: Take the knife and long stick. Cut a notch in the end of the long stick. Making it a little bit smaller than the sharp object you have. 2nd: Place the pointy object into the notch firmly and make sure its rather "snug". 3rd: Take the string and wrap it around the area that the Pointy Object, and the Long Stick are connected. Tie it up VERY TIGHTLY!!! 4th: DONE!
what is a median notch on a dolphin
Oh, dude, the notch on a transistor usually indicates the orientation of the component. It's like a little arrow pointing you in the right direction so you don't accidentally stick it in backwards and blow up your circuit. So, yeah, it's kinda like a helpful little guide to keep you from making a big oopsie.
To cut roughly or hack; to cut into small pieces; to notch or cut in an unskillful manner; to make rough or mangle by cutting; as, a boy haggles a stick of wood., To be difficult in bargaining; to stick at small matters; to chaffer; to higgle., The act or process of haggling.
No way you're going to get Notch's password. Sorry.