0
"Ms" in ping refers to milliseconds, which is a unit of time measurement. In the context of network performance, it indicates the round-trip time it takes for a data packet to travel from a source to a destination and back again. Lower ms values signify a faster connection with minimal latency, while higher ms values can indicate delays or poor network performance.
What else can I help you with?
What is good ping?
Good ping, typically measured in milliseconds (ms), is considered to be around 20-50 ms for online gaming and real-time applications. A ping under 20 ms is excellent, while anything above 100 ms may lead to noticeable lag. Lower ping values indicate a faster response time between your device and the server, which is crucial for a smooth online experience. Ultimately, what constitutes "good" ping can vary based on the activity you are engaged in.
How fast is a 19 ms ping?
A 19 ms ping is considered quite fast and indicates a low latency connection. This means that data packets travel to their destination and back in just 19 milliseconds, which is excellent for online activities like gaming, video conferencing, and streaming. Generally, a ping under 30 ms is seen as ideal for real-time applications, so 19 ms is well within that range.
Is 57 ms ping good for a local server?
yes its in the average range :)
Is Ping Command an MS DOS External command?
yes it is an external command.
What is the use of ping command in ms-dos?
Ping command is used to check the network connectivity. You can use ping command from windows shell only, not from DOS OS as DOS does not supports networking. You can use "-t" switch with ping for continuously network checking.Syntax: Ping Example: ping 192.168.1.15 or ping 192.168.1.15 -t or ping -t 192.168.1.15
When you ping yahoo.com reply but your ms is very heigh?
If ping is reporting large numbers on a ping request it generally means the network is congested or there are bad connections between some of the routers in the route.
What is a ping on CoD?
A ping is like your connection bars on the scoreboard, if you have a four bar connection you have full "ping". It is more used on the PC than consoles. A ping is the amount of time it takes for data to travel to a server, and to get back to you, this varies on many different internet connections, here are some: ms = milliseconds * Cable (20+ms) * DSL (50-200ms) * Dial up (500+ms) * Satellite (690-1200+ms) * EVDO/3G/CDMA (100+) But really most of the time it just depends on your speed. These are just average pings. If only the "bars" were numerical.
What is ping pong effect in gsm?
It is the effect caused by the MS to wildly switch links with either BS when the MS is exactly between the two BSs. pk.thapa66@gmail.com
What does low ping mean?
A Ping is a command which can be executed form a command prompt on a windows linux or unix machine which tests network connectivity. It uses the format: PING (IP address) e.g. ping 192.168.0.1 On a windows machine three attempts are sent to the target IP address and each attempt is timed and displayed in milliseconds. A low ping is a subjective estimate of this "round trip time" (RTT) time. The smaller the number the faster the computer being "pinged" is responding. A very small ping time is described as a low ping, a longer delay would be a high ping time. All of the times described by the term "Low ping" is subjective and defined by experience, but as a guide a ping time of less than 100 mS would be considered a low ping time and one of 250 mS or more would be considered high.
What is ping scanning?
When you "ping" something you test the time it takes, usually in ms, to reach another computer or router, and for that data to come back. So if you were to "ping" google.com, you would get the length of time it takes to teach them and come back. This is useful in testing connection latency, if you have a connection at all, or if a website/computer is down.
What is the output of the ping command?
It depends if you can communicate with the distant end or not. Successful pings will look like this: lap:~$ ping google.com PING google.com (66.102.7.99) 56(84) bytes of data. 64 bytes from lax04s01-in-f99.1e100.net (66.102.7.99): icmp_seq=1 ttl=50 time=65.7 ms 64 bytes from lax04s01-in-f99.1e100.net (66.102.7.99): icmp_seq=2 ttl=50 time=62.2 ms 64 bytes from lax04s01-in-f99.1e100.net (66.102.7.99): icmp_seq=3 ttl=50 time=66.4 ms 64 bytes from lax04s01-in-f99.1e100.net (66.102.7.99): icmp_seq=4 ttl=50 time=64.5 ms ^C --- google.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 62.262/64.749/66.417/1.586 ms Unsuccessful ping attempts will look like this: lap:~$ ping 192.168.1.244 PING 192.168.1.244 (192.168.1.244) 56(84) bytes of data. From 192.168.1.147 icmp_seq=1 Destination Host Unreachable From 192.168.1.147 icmp_seq=2 Destination Host Unreachable From 192.168.1.147 icmp_seq=3 Destination Host Unreachable ^C --- 192.168.1.244 ping statistics --- 6 packets transmitted, 0 received, +3 errors, 100% packet loss, time 5020ms , pipe 3
What is syntax of ping?
From the command line prompt, type "PING 127.0.0.1" (current IP address) and press ENTER From the commFrom the command line prompt, type "PING 127.0.0.1" (current IP address) and press ENTER and line prompt, type "PING 127.0.0.1" (current IP address) and press ENTER
