0
It depends if you can communicate with the distant end or not.
Successful pings will look like this:
lap:~$ ping Google.com
PING google.com (66.102.7.99) 56(84) bytes of data.
64 bytes from lax04s01-in-f99.1e100.net (66.102.7.99): icmp_seq=1 ttl=50 time=65.7 ms
64 bytes from lax04s01-in-f99.1e100.net (66.102.7.99): icmp_seq=2 ttl=50 time=62.2 ms
64 bytes from lax04s01-in-f99.1e100.net (66.102.7.99): icmp_seq=3 ttl=50 time=66.4 ms
64 bytes from lax04s01-in-f99.1e100.net (66.102.7.99): icmp_seq=4 ttl=50 time=64.5 ms
^C
--- google.com ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3003ms
rtt min/avg/max/mdev = 62.262/64.749/66.417/1.586 ms
Unsuccessful ping attempts will look like this:
lap:~$ ping 192.168.1.244
PING 192.168.1.244 (192.168.1.244) 56(84) bytes of data.
From 192.168.1.147 icmp_seq=1 Destination Host Unreachable
From 192.168.1.147 icmp_seq=2 Destination Host Unreachable
From 192.168.1.147 icmp_seq=3 Destination Host Unreachable
^C
--- 192.168.1.244 ping statistics ---
6 packets transmitted, 0 received, +3 errors, 100% packet loss, time 5020ms
, pipe 3
What else can I help you with?
What is the output of the ping command if you ping an address that is not connected to this network?
request timed out.
What is the output of the command used to test a nic card?
PING is what you need to use . Ping 127.0.0.1
Which command is equivalent to the command PING Localhost?
ping 127.0.0.1
Which networking command is most popularly used to test the connectivity of between systems and networks?
The ping command. Traceroute is also useful, but I would start by using the ping command.The ping command. Traceroute is also useful, but I would start by using the ping command.The ping command. Traceroute is also useful, but I would start by using the ping command.The ping command. Traceroute is also useful, but I would start by using the ping command.
What command verifies the existence of a node on a network?
PING command verifies the existence of a node on a network. Ping command is a command of command line interface . It is used to check if the host is alive or not.
When using the ping command how do you instruct the ping command to display statistics while in the middle of a ping operation?
Send it the SIGQUIT signal.
What does -t mean in TCP IP ping?
TCP/ IP stands for transmission control protocol / Internet protocol suite. Ping is a command of command line interface . -t in TCP IP ping means to repeat the ping command continuously.It means to repeat the ping command continuously, until you interrupt with Ctrl-Break.It means to repeat the ping command continuously, until you interrupt with Ctrl-Break.It means to repeat the ping command continuously, until you interrupt with Ctrl-Break.It means to repeat the ping command continuously, until you interrupt with Ctrl-Break.
What is the use of ping command in ms-dos?
Ping command is used to check the network connectivity. You can use ping command from windows shell only, not from DOS OS as DOS does not supports networking. You can use "-t" switch with ping for continuously network checking.Syntax: Ping Example: ping 192.168.1.15 or ping 192.168.1.15 -t or ping -t 192.168.1.15
What is ping command and describe the usage of ping command?
The ping command is to check that an IP address is reachable. the ping command is used to know the active networks and ip address in the network. it also used to self check the address when there is connection trouble with other system. internet control message protocol is used by the ping.
How do you ping the default gateway or ping the printer for a PC that cannot connect to any remote websites?
USE THE PING 127.0.0.1 COMMAND AT HTE COMMAND PROMT
A technician uses the ping 127.0.0.1 command What is the technician testing?
The ping 127.0.0.1 has host name Loopback, and is used to ping your server to verify software. On the command prompt, the technician would type, PING '127.0.0.1' or PING LOOPBACK.
Is Ping Command an MS DOS External command?
yes it is an external command.
