The magneto gap on a 97cc Baja engine, typically found in Baja Motorsports vehicles, refers to the distance between the magneto (or flywheel) and the ignition coil. This gap is crucial for proper ignition timing and engine performance. Generally, the recommended gap is around 0.010 to 0.030 inches, but it's best to consult the specific owner's manual or service guide for precise specifications. Adjusting this gap can help ensure optimal spark generation and efficiency.
Monster Scooter Parts has several tires available for the 97cc Baja Doodle Bug: http://www.monsterscooterparts.com/badbscpa.html
A 2.8 = 97cc
42 mph
0.010"
The magneto air gap is a precision measurement that's taken between the edge of the flywheel and the ignition coil armature. The flywheel and the crankshaft are held together in alignment by the flywheel key.
I believe its .020 with a magneto.
To remove the air screw from a 97cc Baja carburetor, first, ensure the engine is off and cool. Use a flathead screwdriver to gently turn the air screw counterclockwise until it loosens and can be pulled out. Be cautious not to damage the screw or the surrounding components during the process. If the screw is stuck, applying a penetrating oil may help ease it out.
Most of the Briggs engines can be gapped simply with a business card between the flywheel and the magneto.
The magneto point gap on a 2hp Yamaha outboard is 0.35mm, or 0.014".
The 97cc Baja Doodle Bug typically achieves around 80 to 100 miles per gallon (mpg), depending on factors like riding conditions and maintenance. Its efficient small engine is designed for fuel economy, making it an economical choice for short trips and recreational use. However, actual mileage can vary based on rider weight and terrain.
To fix the clutch on a Baja 97cc mini bike, first ensure the bike is turned off and cooled down. Remove the clutch cover and inspect the components for wear or damage, such as the clutch pads and springs. Replace any worn parts, clean the clutch assembly, and reassemble it carefully. Adjust the clutch cable tension if necessary to ensure proper engagement and disengagement.
.010mmType your answer here...