every year Is300 transmission will fit. All E-Shift automatics are the same and all W55 5speeds are the same.
R134a
To locate the solenoid on a 2002 Lexus IS300, first identify the specific solenoid you're looking for, as there are multiple in the vehicle (e.g., transmission solenoid, fuel injector solenoid). For the transmission solenoid, it is typically found on the transmission body, which is located underneath the vehicle. You may need to remove the transmission pan to access it. Always refer to a repair manual for detailed instructions and diagrams specific to your model.
YES. Lexus recommends this changed at 90K miles
remove bulb from in side the boot
The ECU enhances throttle response and the transmissions shifts a bit more aggressively. It is completely safe for both the engine and transmission.
http://my.is/sign up and you can search the forum lots of good writups
The oil drain plug torque specification for a 2002 Lexus IS300 is typically around 29 ft-lbs (39 Nm). It's important to ensure that the drain plug is properly torqued to prevent leaks or damage to the oil pan. Always use a torque wrench for accuracy and consult the owner's manual for any specific recommendations.
i have an is300 also and a got a xenon hid kit on my fog lights, they can be replaced , the bulb type is 9006 (hb4)
To remove the front hub assembly on a 2002 Lexus IS300, start by safely lifting the vehicle and removing the front wheel. Disconnect the brake caliper and rotor, then remove the axle nut. After that, detach the tie rod end and lower ball joint, and finally, unbolt the hub assembly from the strut and remove it carefully. Ensure all components are properly supported and refer to a repair manual for specific torque specifications during reassembly.
To put the driver side window back on track in a 2002 Lexus IS300, first, remove the door panel by unscrewing any visible screws and gently prying it off. Once exposed, check the window regulator and ensure the window is positioned correctly in the track. Carefully lift the window back into the track and secure it, then test the operation. Reattach the door panel and screws once the window is functioning properly.
NO!!!
To replace the catalytic converter on a 2002 Lexus IS300, first, safely lift and secure the vehicle. Disconnect the negative battery terminal, then remove the exhaust pipes connected to the catalytic converter using appropriate tools, such as a socket set. Unbolt the old catalytic converter from its mounting points and replace it with the new one, ensuring all gaskets are in good condition. Reassemble everything by reversing the disassembly steps, and reconnect the battery before starting the vehicle to check for leaks.