You mean a cover like to close the pool over top of the water or a liner to hold the water.
To cover over the water, some companies make vinyl covers, they tend to be more expensive and heavier then woven ones though.
As far as a liner, some manufacturers choose not to make Vinyl Liners for concrete pools for different reasons. You'll have to check with a dealer in your area to find a supplier that does, or pursue other repair options.
Chat with our AI personalities
NO NO !! You must remove the vinyl completely and then check what substrate you have. Concrete plaster or brick will be fine.
A concrete pool is better any where if it is done professionally.
All day long. Concrete pools have real tile instead of the fake liner tile look. You can update a concrete pool later on as styles change: with vinyl it's final.
There are three important construction methods for a swimming pool: concrete, vinyl liner and fiberglass. The most used construnction method for a swimming pool is concrete.
Not all pools have pool liners, some are simply painted concrete. Depends upon your type of pool. If you are concerned with longivity, then consider a thicker vinyl.
What type of surface is it? Concrete, Vinyl or fiberglass? If you have a vinyl or fiberglass pool and it is rough it is probably calcium that has precipitated out of the water you will need to have your pool water analyzed by a professional swimming pool company. If your pool is concrete it could be calcium also or it could be an etching of the concrete both are related to water chemistry and the same professional analysis would need to be performed to resolve the issue.
Be more specific please- what about removing it? cost? difficulty? What type of pool is it? fiberglass? vinyl liner? concrete?
Well first of all there is no such thing as a fiberglass pool. You can have fiberglass walls instead of steel but your pool is still vinyl because you need a liner. These are the usual combinations of inground pools. Sand floor, steel walls, vinyl liner Sand floor, fiberglass walls, vinyl liner Vermiculite floor, steel walls, vinyl liner Vermiculite floor, fiberglass walls, vinyl liner Concrete floor, steel walls, vinyl liner Concrete floor, fiberglass walls, vinyl liner Concrete floor, concrete walls, no liner Concrete pools have to be painted with epoxy paint or if you want tile installed then usually you plaster over the concrete. Now a days 3 and 4 are the most common inground installs. 1 and 2 are usually pools that are 30 + years old although you can still have them done that way. In South Alabama the cost of a 20 *40 vinyl pool will cost around 18 to 22 thousand
How are you planning on making the pool water tight? If you want to use a Vinyl Liner, you should consult the dealer you are planning on ordering the liner from. A lot of Vinyl Liner manufactures will not make a liner for that pool.
To fix a detached vinyl liner from its spot on an above ground pool, the water will have to be drained from the pool. Then, a marine patch can be placed on the area to re-attach the vinyl to the place where it came apart. Allow this to dry thoroughly before refilling the pool.
The experts at Advanced Pool Coatings have been installing fiberglass coatings over vinyl liner pools for over 30 years. You can read more at: http://www.advancedpoolcoatings.com.
Yes if there is not a lot of movement in the ground