Yes, you can use liquid stabilizer in a pool with a cartridge filter. Liquid stabilizers, typically cyanuric acid, help protect chlorine from being broken down by sunlight. When adding stabilizer, ensure it's well-dissolved and evenly distributed in the pool to avoid any clumping. Always follow the manufacturer’s instructions for the appropriate dosage based on your pool's volume.
Chlorine stabilizer, also known as cyanuric acid, is slow to dissolve in water because it is a large molecule that requires time to break down and disperse. It should be pre-dissolved in a bucket of water before adding it to the pool to help it dissolve more easily and prevent clumping.
No, pool shock is normally a really strong chlorine and stabilizer is like sunscreen for the chlorine
no
To find a leak in your pool, you can conduct a simple bucket test. Fill a bucket with pool water and place it on the pool steps. Mark the water level inside the bucket and on the pool. Check after 24 hours. If the pool water level drops more than the bucket, you likely have a leak.
you have to aid a conditioner or stabilizer with cynaric acid in it.
Add chlorine and stabilizer.
Ad cyanuric acid/stabilizer, this is available from your pool shop
When adding stabilizer to a pool you should not have a backwash valve open. Stabilizer should be added directly into the skimmer basket and you should open the skimmer all the way and close off the main drains for 24 hours.
To find a leak in your pool, you can conduct a simple bucket test. Fill a bucket with pool water and place it on the pool steps. Mark the water level inside the bucket and the pool water level. After 24 hours, compare the two levels. If the pool water level has dropped more than the bucket water level, you likely have a leak.
To detect a leak in a pool, you can perform a simple bucket test. Fill a bucket with pool water and place it on the pool steps. Mark the water level inside the bucket and the pool water level. After 24 hours, check if the water levels have changed. If the pool water level has dropped more than the bucket water level, it may indicate a leak.
To detect a leak in your pool, you can perform a simple bucket test. Fill a bucket with pool water and place it on the pool steps. Mark the water level inside the bucket and the pool water level. After 24 hours, compare the two levels. If the pool water level has dropped more than the bucket water level, it may indicate a leak.